| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
Does anyone have a good template for a hood tach placement on a 1971 Lemans Sport Hood?
|
|
#2
|
||||
|
||||
|
Me tooo! Actually I'm going to buy one soon......with the template.
__________________
'66 Valiant Regal 225 '72 Lemans Station Wagon T-41, 455 '76 Trans Am 455 '77 Ford F-100 4WD 351 '78 Ford F-100 2WD 302 '79 Firebird Black 301 '79 Z28 350 '79 Trans Am 403 numbers matching '04 Ford Falcon XR8 5.4 ltr. and no wife.........Yipppeeeeeee |
|
#3
|
|||
|
|||
|
sweetjudge..hes a member
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered."
|
|
#4
|
|||
|
|||
|
When I put my hood tach on my 71, I couldn't find a template for it. It came with a template for up to a 70 though. I found there were two options; follow the 70 template and cut a hole through the hood bracing or move the tach a few inches towards the centre of the hood.(for the left to right measurement) After reading a few reports of hoods buckling after cutting holes in the bracing, I positioned my tach more towards the centre of the hood. The fore and aft positioning from the template was accurate and I followed that measurement and for the left to right, I cut the hole as close as I could to what would be the suggested template without touching the hood brace. I have had one or two people tell me its in the wrong position but for the most part, people won't notice - and my hood hasn't buckled.
Glen. |
|
#5
|
||||
|
||||
|
Here is a template I downloaded awhile back. Hope it helps.
__________________
Regards, Steve in Arizona |
| Reply |
|
|