Reply
 
Thread Tools Display Modes
  #1  
Old 02-17-2012, 01:10 AM
GTO JOHN's Avatar
GTO JOHN GTO JOHN is offline
Ultimate Warrior
 
Join Date: Nov 2005
Location: Minneapolis, MN
Posts: 3,637
Arrow 1970 LeMans Roller

Here is a 70 Lemans shell I just picked up. Prior owner was using it as a parts car for his pro touring 70 LeMans project. Originally purchased both cars in Arkansas and brought both up to Minnesota when he moved here a few years ago. Frame is drum brake, power steering, open rear. Rolls and steers. Nice frame with crossmember no rust on the frame. Newer rear shocks.

Body has nice floors except where prior owner cut out floor brace on passenger side. Couple pinholes in passenger rear floor. Front and rear window channels are nice. Lower rear window corners have some small rust areas not bad at all. Package tray, rear seat divider are nice. Rear seat mount clips are missing. Needs quarter skins due to rust. Outer wheelhousings might be ok, inners are good. Trunk floor needs replacement due to cutout sections. Was hit in back at one time so tailpanel tweeked a bit. Roof and sail panels good, catwalk good both top and bottom. Decklid torsion rods intact. Firewall and dash top are nice. no tags (prior owner removed)

Rust free decklid is super nice. Doors both have super nice clean seams, one ding in the back edge of one door, some rust bubbling on one door. Fenders are shot but inners and hood hinges are good.

Good builder or part out for frame, decklid and doors.

$1200 for everything or $500 for rolling frame and bare shell.

I will sell decklid, doors, and inner fenders seperate but only after the shell is sold.

Thanks John








Attached Thumbnails
Click image for larger version

Name:	DSC02551.jpg
Views:	72
Size:	74.4 KB
ID:	275114  

__________________
John

Email [email protected]

My Website www.minnesota-muscle.com

  #2  
Old 03-11-2012, 01:37 AM
bignate's Avatar
bignate bignate is offline
Senior Chief
 
Join Date: Feb 2009
Location: Reedsville, WI
Posts: 446
Default

How much for just the bare shell, no frame? Looking to start a race car project.

Thanks, Nate

__________________

1970 "Real" Judge RAIII 4-speed, Atoll Blue w/painted white top. Mild RAIV headed 400 motor in now.
  #3  
Old 03-11-2012, 10:12 PM
GTO JOHN's Avatar
GTO JOHN GTO JOHN is offline
Ultimate Warrior
 
Join Date: Nov 2005
Location: Minneapolis, MN
Posts: 3,637
Default

Nate,

Do you need the doors and decklid?

I also have a 69 shell available for a race car project.

In addition, I have a fiberglass 69 GTO front clip, hood, decklid, and rear bumper.

Thanks John

__________________
John

Email [email protected]

My Website www.minnesota-muscle.com

  #4  
Old 03-15-2012, 11:48 PM
GTO JOHN's Avatar
GTO JOHN GTO JOHN is offline
Ultimate Warrior
 
Join Date: Nov 2005
Location: Minneapolis, MN
Posts: 3,637
Default

Sale pending on shell to Nate.

__________________
John

Email [email protected]

My Website www.minnesota-muscle.com

  #5  
Old 03-16-2012, 05:15 AM
Hillard's Avatar
Hillard Hillard is offline
Ultimate Warrior
 
Join Date: Jan 2005
Location: Springfield, Ohio
Posts: 1,329
Default

Might be interested in deck lid. Let me know if available.

  #6  
Old 03-19-2012, 12:00 AM
GTO JOHN's Avatar
GTO JOHN GTO JOHN is offline
Ultimate Warrior
 
Join Date: Nov 2005
Location: Minneapolis, MN
Posts: 3,637
Default

Once the car is gone I will offer the decklid and doors. 1050goat will get dibs on the lid.

__________________
John

Email [email protected]

My Website www.minnesota-muscle.com

  #7  
Old 03-28-2012, 01:43 PM
GTO JOHN's Avatar
GTO JOHN GTO JOHN is offline
Ultimate Warrior
 
Join Date: Nov 2005
Location: Minneapolis, MN
Posts: 3,637
Default

Rolling frame and body shell are SOLD. Thanks Nate, Good luck with the project!

__________________
John

Email [email protected]

My Website www.minnesota-muscle.com

  #8  
Old 06-03-2012, 11:57 AM
455conv's Avatar
455conv 455conv is offline
Senior Member
 
Join Date: May 2000
Location: Seattle
Posts: 184
Default

It looks like this car had body side mouldings. Do you still happen to have those?

  #9  
Old 07-11-2012, 01:15 AM
richmas5 richmas5 is offline
Chief Ponti-yacker
 
Join Date: Jan 2007
Location: northern nj
Posts: 556
Default

John are you still holding on to that deck lid

  #10  
Old 07-11-2012, 05:50 PM
GTO JOHN's Avatar
GTO JOHN GTO JOHN is offline
Ultimate Warrior
 
Join Date: Nov 2005
Location: Minneapolis, MN
Posts: 3,637
Default

No side mouldings, (never came with the car)

I picked up a 71 GTO back in April so I am keeping the decklid for that car.

All other parts are sold.

__________________
John

Email [email protected]

My Website www.minnesota-muscle.com

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:10 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017