| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
01-15-2013, 12:08 PM
|
||||
|
||||
Correct Brake Booster
Ok now I am getting ready to take off my brake booster and I was going to send it out to get cadium plated, but upon looking on Ebay there is a bunch of ones pretty cheap that have the Delco Stamp on them. I must admit these are kind of looking like the way to go, any ones to stay away from.
__________________
http://ultimategto.com/cgi-bin/showc...71/71_00075_18 |
|
#2
01-15-2013, 01:41 PM
|
||||
|
||||
|
I use one, no problems except that I had to change the pin going from the booster to the master cylinder to the original one.
The repro one was 1/4" to long so the brakes did not release completely. If I remember right I got mine from PY by the way, and no stamp since the original one did not have it. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
