[dmorg1]

Hey Guys,

I am looking to replace a 68 convertible top power feed wire. This is the wire that runs from the horn relay through the firewall to the back of the fuse block and holds one side of the shorting bar.






Is this harness available off the shelf or will I need to have it made up?

Thanks,

Dave

[6869GTO]

I'm pretty sure if you buy the dash harness for a 68 vert that wire will be on the fuse block but if you are just looking to replace that one wire only that's different. Is that what your looking to do? I'll look,I might have a decent one if your not going conq gold.

[dmorg1]

Leo,

The rest of the dash harness is pretty good so I am just looking to replace this feed that is all hacked up.


Dave

[marxjunk]

i have one out of a 68 cutlass ragtop im not using let me see if it looks the same, or if ya can modify it

[dmorg1]

Leo and Mark,

Thanks for the offers but I was able to find an outfit that was willing to put this feed wire together.

M&H along with American Autowire were unable to provide the feed alone. Marc at Autowire gave me a few contacts where he thought I might be able to find the components but unfortunately they did not have the pieces.

So I contacted Scott at YnZs Yesterdays Parts and he was able put the wire together for under $23.00 and have to me in under a week.

If anyone is looking for an out of the ordinary wire give YnZs Yesterdays Parts a call.

Oh, and thanks to Mike S at PY for offering to help me find the wire.


Dave