| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#41
07-03-2014, 12:13 PM
|
||||
|
||||
Tom, thanks for the info.
I spoke with Herb at LPI and we discussed a few things, unfortunately the cap fix will take longer than i have at the moment. I am going to button it up and run it the way it is until this winter. I will then do the cap fix and install an oil pump from LPI this winter when i have the motor out again. I will most likely do a pan & oil cooler at the same time. So i guess i will try putting the front seal in backwards and see how it works. I am not sure if i will get a very good idea with no load though. Changing the seal once the boat is back together is not easy (have to pull the v-drive to remove the driveshaft, etc.).
__________________
Derek B. Current best: 11.97@110 1.65-60' !!! '74 ventura,  (Fired july 14/06) '74 462 4-bolt (9.5-1), SCAT, Ross, T-II w/850DP (shaker455), TH350, Conti 10'' 3800, Supercomps, Magnaflow, 3'' Pypes, 3.73's, 28x13.5-15 ET streets.1970 Beismeyer 17' flatbottom vdrive, 11.8:1 455P, ported heads, dual Qjet tunnel ram. 
|
|
#42
07-04-2014, 06:24 PM
|
||||
|
||||
|
I realized I don't have the timing cover alignment sleeves, probably the culprit for my seal leak. So question is should I try the seal in reverse due to the header evacs or just try it normal?
Sent from my iPhone using Tapatalk
__________________
Derek B. Current best: 11.97@110 1.65-60' !!! '74 ventura, (Fired july 14/06) '74 462 4-bolt (9.5-1), SCAT, Ross, T-II w/850DP (shaker455), TH350, Conti 10'' 3800, Supercomps, Magnaflow, 3'' Pypes, 3.73's, 28x13.5-15 ET streets.1970 Beismeyer 17' flatbottom vdrive, 11.8:1 455P, ported heads, dual Qjet tunnel ram.
|
|
#43
07-04-2014, 06:40 PM
|
||||
|
||||
 Another pic Sent from my iPhone using Tapatalk
__________________
Derek B. Current best: 11.97@110 1.65-60' !!! '74 ventura, (Fired july 14/06) '74 462 4-bolt (9.5-1), SCAT, Ross, T-II w/850DP (shaker455), TH350, Conti 10'' 3800, Supercomps, Magnaflow, 3'' Pypes, 3.73's, 28x13.5-15 ET streets.1970 Beismeyer 17' flatbottom vdrive, 11.8:1 455P, ported heads, dual Qjet tunnel ram.
|
|
#44
07-04-2014, 07:06 PM
|
||||
|
||||
|
Very Nice!
TV
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
#45
09-04-2014, 12:18 PM
|
||||
|
||||
|
A quick vid of my boat at our local car club meet lastnight. Had i known my buddy was taping i would have lit er up.
http://www.youtube.com/watch?v=NAvx7SmfkOg
__________________
Derek B. Current best: 11.97@110 1.65-60' !!! '74 ventura, (Fired july 14/06) '74 462 4-bolt (9.5-1), SCAT, Ross, T-II w/850DP (shaker455), TH350, Conti 10'' 3800, Supercomps, Magnaflow, 3'' Pypes, 3.73's, 28x13.5-15 ET streets.1970 Beismeyer 17' flatbottom vdrive, 11.8:1 455P, ported heads, dual Qjet tunnel ram.
|
|
#46
09-05-2014, 01:56 AM
|
||||
|
||||
|
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
