| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
||||
|
||||
|
Hey guys,
I need a new battery for my 76 GP. The original group size for the battery is 74 with side posts, but I can't find any available in this size. I want to use the original hold down clamp, so the battery should have the height of the original: 8 inch 3/4. What's the solution to my problem? Thanks, Hans |
|
#2
|
||||
|
||||
|
Use a group 78.Put the spacer under it.You will need to boost it about 1 1/2 inches
http://www.batteryweb.com/bci.cfm |
|
#3
|
|||
|
|||
|
There was a time after battery sizes changed they would enclose a plastic battery adapter tray with the purchase of any new battery. Going back a few years you could find these adapters in any junk yard mostly under mid 70’s Cadillac battery.
|
|
#4
|
||||
|
||||
|
Thanks Guys,
Where can I buy the spacer, or does it come with some Group size 78 batteries? /Hans |
|
#5
|
||||
|
||||
|
Some batterys come with them.Probably going to have to ask the retailer about it though.I don't recall any group 78 that comes with one.
|
|
#6
|
||||
|
||||
|
I know that the spacer comes with some of the batteries from azone
|
|
#7
|
||||
|
||||
|
Thanks again for all the suggestions. I will check with Auto Zone for a size 78 with spacer. I am sure I can find what I need now that know what to look for.
/Hans |
| Reply |
|
|