[Krow]

Looking for the factory ladder bars and brackets to install on car and rear, im posting for a friend who has a 67FB, whatever parts you have bars, brackets let me know you can e-mail me at leh111@aol.com or txt or call 1-732-547-5419 my name is Glenn, Thanks

[Ron Landis]

Originally Posted by Krow

Looking for the factory ladder bars and brackets to install on car and rear, im posting for a friend who has a 67FB, whatever parts you have bars, brackets let me know you can e-mail me at leh111@aol.com or txt or call 1-732-547-5419 my name is Glenn, Thanks

I have a powder coated housing WITH the brackets. You do know that a '67 is "one year only" with the A-body center...right? Also tricky when you go to welding on axle tubes if it's not set up in a jig. Just food for thought. I'd take $200 for the housing...cost of the powder coating alone. It was an Arizona unit to start with so NO pits.

[Krow]

He already has a housing he wants to install the laddr bar set up on his housing, so he just wants the brackets and bars

[Krow]

What housing is it 10bolt 8.2? Or 8.5 i may still interested?

[Krow]

Yea he said he may be interested i just did some research and never new the housings were different just thought the axle tubes just had the brackets, so now what does the two eyelets on the housing do?

[Krow]

He does not have the right housing we checked so we may be interested

[Ram4king]

I have a complete set of bars along with the brackets and hardware. 400.00. I'm in Phila,pa

[rexs73gto]

67 used a single traction bar only. It went on the right side ONLY, 68 used traction bars on both sides. 67 was a 1 year only set up for the right side only.

[tinindian68]

67 was the only year for the traction bars. Lower horsepower and automatic cars got one bar, higher horsepower and stick cars got two.

In 68, the mono leaf springs were changed with multi leaf, which eliminated the need for the bars all together. The rear shocks were also staggered in 68.

[Ram4king]

Originally Posted by rexs73gto

67 used a single traction bar only. It went on the right side ONLY, 68 used traction bars on both sides. 67 was a 1 year only set up for the right side only.

WRONG

[Krow]

Thanks everyone for there replies. Ram4king my friend is thinking it over it sounds like a good deal plus youre close ill contact you when i hear back from him.... Anyway im not sure about what cars got what ladder bar set meaning the two or single bars, ive had two 67 converts in my day and still own one both stick cars and both cars had both bars i had one back in the eighties and one in present time im sure they have could of been installed later by someone but ill never know anyway im sure if we discuss thismit will have to be in another part of the forum because this is for parts wanted anyway thanks for the replies.

[69FIREBIRD76MM]

http://m.ebay.com/itm/1967-Firebird-...589?nav=SEARCH
There is a few more on ebay, cheaper too.