 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
12-16-2015, 04:37 PM
|
|||
|
|||
FS NEW Scorpion SRP-ST2112OPR Short Travel Hydraulic Roller Lifters
NEW Scorpion SRP-ST2112OPR Short Travel Hydraulic Roller Lifters
FOR PONTIAC 350 - 540 Scorpion SRP-ST2112OPR Short Travel Hydraulic Roller Lifters $530.00 shipped in the lower 48 NEW NEVER INSTALLED STILL IN BOX These are now only available from Scorpion or Johnson Lifters $600+ on both sites (as far as I can find) PM me if you are interested      
|
|
#3
12-23-2015, 12:00 PM
|
|||
|
|||
|
These are made by JOHNSON LIFTERS ® Made in the U.S.A.
These are the good ones If you want the cheap offshore junk that tick, collapse, and blow oil out, move along, these are not them. Scorpion is not going to carry these lifters any more. Johnson is continuing to make these lifters and others for Pontiacs. These are NOT Hy-Lift Johnson lifters. Don't get confused. They are not the same. They do not tick at idle after being run for a while. They have the proper internal valving so all the oil does not bleed around the push rod cup. They will support over 0.700 lift @ 8000+ RPM. Call Joe Lewis @ Johnson - He will tell you the truth about why other lifters collapse and tick. Butler Performance uses these and other lifters made by Johnson - Ask Jim Butler. MSRP + Shipping from Johnsonlifters.com 2112OP Standard Travel $615.00 2112OPR Race $640.00 ST2112OPR Short Travel $675.00 I am using solid rollers These won't fit my application They will fit any standard lifter bore Pontiac 350 thru 540 |
|
#4
12-23-2015, 12:44 PM
|
|||
|
|||
|
If i had the Dough! These are very nice Lifters, I recommend these to guys that are going to Spin a Big Aggressive Hyd Roller to 6500+ and who doesnt want to go with solid lifters, glwts!
__________________
Build it Right Build it Once!!! Just another Engine Builder from the Northwest lol |
|
#6
01-01-2016, 04:01 PM
|
||||
|
||||
|
Another sales plug... had these in my previous motor and really like them. Wish they were for sale when building my new motor last winter!
__________________
68 Firebird-- Street/Strip - 400/461 Eagle Forged Bottom End & Ross Flat top pistons. KRE 325 CFM D port, Ultradyne 263/271 @.050, .4267 lift. Crower Solid roller lifters and 1.65 stainless rockers. Quickfuel 1000 on Torker2 intake and 2" open spacer. Hedman 1.75" headers. TH400 w/brake. Ford 9" w/3.80 gears & 28x9 Hoosier pro bracket drag radial. Best ET: 1.35 60ft, 6.29 @ 107.20 mph, 9.99 @132.33 mph. 3,300 race weight |
|
#7
01-01-2016, 09:19 PM
|
||||
|
||||
|
PM sent.....
__________________
" Darksiders Rule "
|
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
