FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
![]()
I'm doing the JGC streering box swap on the 66 GTO but need the P/N for the rag joint. Someone posted a pic and P/N here of a joint which could be used without any modification or drilling of the original coupling but I cannot find it. It was not a Lee or other special one but a GM part.
__________________
Reef turqoise -66 GTO Firebird Convertible -68 R.I.P. -73 LeMans 350/350 Barnfind |
#2
|
||||
|
||||
![]()
Anything that can be ordered and sent to Sweden will also do. Did a quick check on ragjoints thru the swedish GM supplier and a 79 - 80 pickup joint would cost 150 USD......
__________________
Reef turqoise -66 GTO Firebird Convertible -68 R.I.P. -73 LeMans 350/350 Barnfind |
#3
|
||||
|
||||
![]()
Lares part #200 or Dorman #31011
|
#4
|
||||
|
||||
![]()
Thanks, Dorman P/N ordered.
__________________
Reef turqoise -66 GTO Firebird Convertible -68 R.I.P. -73 LeMans 350/350 Barnfind |
#5
|
|||
|
|||
![]()
Next time use a rag joint from a 80 Camaro. lot cheaper. Any Camaro restoration company has it. That is what I used on my Jeep box and stock steering column.
__________________
connman |
Reply |
|
|