[62badboy]

Do you possibly have a year model for that rim?
thank you.
Jim

[62badboy]

Hello, Can you please measure the backspace on that wheel?
Much appreciated,
Jim

[c5farmer]

Here are some pictures of the mopar rims. I did use a 1/4" spacer as can be seen in the pictures. P215/70-15 tires on a 63 Tempest. I didn't measure the bs, but it must be 4".

[62badboy]

Any part numbers that are available would be helpful.
I do appreciate the help gentlemen,
Jim

[JohnFromVentura]

Ford Ranger rim:
Distance from mounting face to rear of rim: ~4 1/8"
Actual backspace is measured from mtg surface to inner tire bead so subtract 1/2" from 4 1/8" (this is often confused). I think all Ford Ranger rims are the same. I also think that I got the Ranger wheel tip from the guy at Skybird brake conversions? John

[heater63]

Using them on my wife's 63 with Scarebird conversion. Works great. Don't know what year o mod l of Ranger but not sure it matters. As long as they are 15" and 5 bolt. Caps fit too

Heath