[Mr Dave]

This is a pair of upper control arms from Global West for the front of a 68-72 A Body. These are made for the tall spindle (F-body) conversion. I removed these to replace ball joints for the rebuild of the car and realized I'd rather just buy new control arms where the ball joints are more readily replaced. These arms have a welded in retaining ring that must be removed to replace the ball joints. Of course, this means you either paint or have to have them powder coated again. I have stripped one and started removing the retaining ring on the other. $225 plus shipping

[Mr Dave]

bump it up

[drtracer58]

Hey Neighbor

[Mr Dave]

Originally Posted by drtracer58

Hey Neighbor

Howdy

[439gto]

Do these use the standard F body ball joints?? And do they have bushings??

[Mr Dave]

I don't know. I emailed Global West and all they have me was a part number for the ball joints. The bushings were 20+ years old, so I threw them away.

[Mr Dave]

Bump up....make an offer if you're interested. I'm buying new lowers so I'll probably buy new uppers to match.

[Mr Dave]

Gonna try and sell these again. Anyone interested???

[ROCKETMAN269V]

Originally Posted by Mr Dave

.....I'm buying new lowers.....

If you didn't already purchase the lowers, I have a customer that bought the complete package from Global West, then decided to go with the coil over front end; so he has the lowers that you need. Let me know. Thanks, Bob.

[Mr Dave]

I am going to use coil overs as well. Thanks for the offer though!

[Mr Dave]

Finally going to work on my car again, so....any interest in these???