[Racer81x]

Parting out mostly complete, but rough 72.
Has the following options:
A/C
Pwr disc brakes
Buckets and council
Tilt column
Vinal top
Interior is White, buckets are rough and need totally redone, dash and door panels are cracked.
Body panels and frame are rusty, can cut pieces from either if needed.

THE FOLLOWING PARTS HAVE ALREADY BEEN SOLD:
All underhood A/C parts
Most of the dash duct work
Speedo Cluster
Fan Shroud
I am keeping the 400 engine

Let me know what you need.

[400 4spd.]

I need a good set of moldings for the back glass. Also need the v. top molding that runs vertical, behind the driver's door window.

[Racer81x]

Originally Posted by 400 4spd.

I need a good set of moldings for the back glass. Also need the v. top molding that runs vertical, behind the driver's door window.

If I get time i'll look some night after work this week and check condition and let you know, otherwise it won't be until next Saturday before I can check.

[400 4spd.]

No rush. PM me when you have an answer.
Thx.

[Racer81x]

Disc brake set up and tilt column have been sold.


400 4spd, sent you a PM