[Josue]

Finally made the swap to a 2004-R in my Firebird, time to clear up some garage space!

First is a Hughes GM20BPO TH350/TH400, 2000 RPM stall torque converter. Less than 3 years old, with less than 2,000 miles use.

https://www.summitracing.com/oh/part...0bpo/overview/

Asking $130 shipped.







Also have a pair of TH350's. First one was out of a 2nd gen. I bought it used off craigslist (who happened to be a well known Pontiac source both on and off the forums!) when people were telling me how cheap I could find one as an upgrade to my original powerglide. Had a shift kit, and came with an unknown converter, around 2500-2800 stall, for $300. Worked as it should, but had some leaks. The converter was WAY too big for me, so I swapped to the above Hughes and it made a world of difference for my mild street cruiser. While I had it out/apart, I put a new filter, pan gasket, and shifter shaft seal on in hopes of fixing the leak(s). Still would dribble and leave spots on the ground though, so I'm not sure how exactly to advertise it? Just do a tear down and gasket/seal replace? Completely rebuild it? Up to you. It also has a different tooth speedo gear, for the correction with my rear end/wheel setup, but I'd have to dig through old threads to remember which one I went with.

Asking $250, comes with that unknown converter.






The other TH350 is out of a 69 Lemans. Came with a dropout I bought for my Firebird. Used the engine, don't need the trans. Saw the car it came out of, and my engine is coded for the car, so I have no reason to believe that this isn't out of a 69 Lemans. Not sure if there are any numbers to check, but I'd be willing to do so if requested.

Unsure of the running condition, but the engine didn't look bad at all when I tore it down for a rebuild, so hopefully this is a decent trans too. Asking $150, and it comes with the stock converter still attached.




Not sure on the freight charges with items of this size. Never done it before, and it's a little intimidating to be honest! I'd be willing to entertain shipping though, if it's something you can't find locally and have to have. If you're somewhat local to 44001, I'm willing to drive up to around 2hrs from me as well, for asking price. Pretty much the big cities; Detroit, Columbus, Pittsburgh, Erie, etc. I'll also be at Norwalk this year, if you want to set something up there.

[bascom123]

Interested int he torque converter, you have a pm.

[Josue]

Trying to reply to it, but the site is slow and not letting me.

I can do that price. My paypal is josue03600@yahoo.com, and I can probably get it shipped out later today.

[Josue]

Trying to reply to it, but the site is slow and not letting me.

I can do that price. My paypal is josue03600@yahoo.com, and I can probably get it shipped out later today.

[Josue]

Forgot to update this....Hughes converter sold.

[Josue]

Can bring one, or both, of these to Norwalk this weekend!

[Josue]

Both transmissions are sold.