FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Lower Ball joint diameter to spindle, 62 Cat
Good morning.
I ordered ball joints from PST. The diameter of the joint would not fit, was too large for the spindle. I measure the ID spindle for the lower ball joint at 0.66" Does somebody have either an OD of a correct 62 ball joint or an ID of the stock 62 spindle? Thank you, Joel |
#2
|
|||
|
|||
Check Howe ball joints. They are modular and very well made..
Last edited by 389; 09-24-2018 at 10:20 PM. |
Reply |
|
|