| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-17-2018, 11:56 AM
|
|||
|
|||
225/75/15 fit
Has anyone here installed a 225/75/15 stock wheel,factory ride height with no fender lip modification on a 63?
|
|
#2
12-08-2018, 08:08 AM
|
|||
|
|||
|
I've had 205-65-15 on my 61, the 2 rears rubbed on fender lip and the 2 fronts hit the upper fender brace when going over a speed bump or driveway
|
|
#3
12-08-2018, 10:03 AM
|
||||
|
||||
|
Probably not. The largest I have fit into a stock 62 was a 215/70R15. They would touch the fender brace while turning into a driveway and hitting the small curb bump there.
If you have done the disk brake conversion to the front, the largest I have found to fit was a 195/70R15. The disk brake moves the tire/rim outboard slightly, that mandates the smaller size.
__________________
If you built it, drive it. red 62 Tempest total stock restoration. white 62 Tempest modified, 61 389 Tri-Power, and a conventional drive train. |
|
#4
12-09-2018, 03:24 PM
|
|||
|
|||
|
Thank you for the replies.I was asking about a 63.Might be a little different than 61-2.Regardless thanks again.
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
