[monzaz]

i HAVE SOME LIMITED QUANTITIES OF YUKON DURA GRIP EATON POSI UNITS FOR DISCOUNTED PRICES
10 BOLT 8.2 YDG POSI -------------365.00 ( 5 UNITS)

10 BOLT 8.2 GEAR SETS YUKON (27 SPLINE PINION)
1 SET OF 3.90 RATIO ---- 220.00
1 SET OF 3.73 RATIO ---- 249.00 NITRO GEAR AND AXLE BRAND
2 SETS OF 3.55 RATIO ---- 243.00
2 SETS OF 3.36 RATIO ---- 283.00
LIMITED QUAntites....

MASTER REBUILD KIT FOR THE PONTIAC 8.2 REAR ----- 109.00 (4 KITS)
HAS THE FOLLOWING ITEMS IN THE KIT.
2 carrier bearings and races
1 inner pinion bearing and race
1 outer pinion bearing and race
1 Pinion seal
1 pinion crush sleeve
1 pinion nut
1 rear inspection cover gasket
1 carrier pack of carrier shims
1 pinion pack of shims
1 marking compound and applicator brush
10 ring gear bolts
1 RED loctite vial
1 booklet to help you with your set-up pattern and torque specs.

NEED ZIP CODE FOR SHIPPING
THANK YOU, JIM
PM WITH INTERESTS AND QUESTIONS

[JKGTO]

What gear ratios and axels will work with the Yukon posi units? Thanks

[Gtodoc]

PM sent

Sent from my SAMSUNG-SM-G930A using Tapatalk

[george kujanski]

Same question as JKGTO....what ratios will work the posi carrier? I've got 3.23

george

[455hota]

To clarify, the stock rear axle in a 1966 GTO would have been a 10 bolt Pontiac 8.2 inch axle correct?


Sent from my iPhone using Tapatalk

[sprintbird]

Sent you a PM

[fatindian]

Will 3:36 gears from a 67 GTO fit this Yukon unit?

[monzaz]

I have listed all the ratio that fit the carrier 3.36 3.55 3.73 3.90 and beyond.
2.93 3.08 3.23 are on the mid series carrier.
2.56 and 2.78 are on the 2 series carrier.

[monzaz]

I am answering the questions in order in the PMs. Sorry it took so long as it has been a busy sporing already.

Jim

[fatindian]

I'll take a posi unit for my3:36 gears.ship to26301.
Thanks

[monzaz]

You have to PM me for the shipping quotes etc. Thank you.

3.90 gears are gone till next order.

[monzaz]

1 set of 3.36 Nitro gears left
1 set of 3.55 gears left
1 set of 3.73 gears left.
end of the month I will shut this down. Just to get you guys off into spring deal.

Jim
J D
Akron, Oh

[monzaz]

i HAVE SOME LIMITED QUANTITIES OF YUKON DURA GRIP EATON POSI UNITS FOR DISCOUNTED PRICES
10 BOLT 8.2 YDG POSI -------------365.00 ( 5 UNITS)

10 BOLT 8.2 GEAR SETS YUKON (27 SPLINE PINION)
0 SET OF 3.90 RATIO ---- 220.00 sold out
1 SET OF 3.73 RATIO ---- 249.00 NITRO GEAR AND AXLE BRAND
1 SETS OF 3.55 RATIO ---- 243.00
1 SETS OF 3.36 RATIO ---- 283.00
LIMITED QUAntites....

MASTER REBUILD KIT FOR THE PONTIAC 8.2 REAR ----- 109.00 (4 KITS)
HAS THE FOLLOWING ITEMS IN THE KIT.
2 carrier bearings and races
1 inner pinion bearing and race
1 outer pinion bearing and race
1 Pinion seal
1 pinion crush sleeve
1 pinion nut
1 rear inspection cover gasket
1 carrier pack of carrier shims
1 pinion pack of shims
1 marking compound and applicator brush
10 ring gear bolts
1 RED loctite vial
1 booklet to help you with your set-up pattern and torque specs.

This is it last chance for spring deals--- back to regular price the rest of the summer.
Thanks, Jim

[MidnightAuto]

Just pm’d u. Lmk.