FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Location of Under Seat Metal Wire Cover
Hi,
Can someone tell me or post a pic of where the metal cover that sits under the rear bottom seat go? It’s been years since I removed it and the screw holes for locating it was covered with “Lizard Skin Sound Deadener “ I have added pics where it seems to fit the best as it lines up with the floor pan stamping (Marked up with yellow) Thanks, Don
__________________
1966 GTO 1966 421-9.3-1 comp-Race Tec 23cc Pistons 1966 Tri-Power 1967 670 Heads Pontiac "Highlift" TriPower Cam by SpeedPro DUR 214 Int 224 Exh @.050 - 107 ICL LIFT .445" Int .465" Exh Tri-Y-Headers by Tribal Tubes w/ Goerlich Mufflers 1966 Muncie Wide Ratio 4-Speed 1968-72 Chevy 12 Bolt Rear End w/ 3.73 rear gears |
#2
|
||||
|
||||
You are correct as it should lay as snug to the pan configuration as possible. I don't think there was an exact spot.
Mine was closer to the center hump but I've seen a few also close to the seat bottom retaining bracket. I would only suggest whichever side you chose, keep any/all wiring off to the side of the footwell so as not to create any pinching issues. All mine ran along the tunnel.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#3
|
||||
|
||||
You are correct as it should lay as snug to the pan configuration as possible. I don't think there was an exact spot.
Mine was closer to the center hump but I've seen a few also close to the seat bottom retaining bracket. I would only suggest whichever side you chose, keep any/all wiring off to the side of the footwell so as not to create any pinching issues. All mine ran along the tunnel. Thanks Jeff, That pic and your advice are most appreciated. -Don
__________________
1966 GTO 1966 421-9.3-1 comp-Race Tec 23cc Pistons 1966 Tri-Power 1967 670 Heads Pontiac "Highlift" TriPower Cam by SpeedPro DUR 214 Int 224 Exh @.050 - 107 ICL LIFT .445" Int .465" Exh Tri-Y-Headers by Tribal Tubes w/ Goerlich Mufflers 1966 Muncie Wide Ratio 4-Speed 1968-72 Chevy 12 Bolt Rear End w/ 3.73 rear gears |
Reply |
|
|