FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Speedmaster Heads
I am selling a set of speedmaster round port heads. These are new in box. Selling because I found some D-ports and I am moving so ok with selling if someone wants to purchase.
https://www.speedmaster79.com/Pontia...-Cylinder-Head Speedmaster Pontiac heads include valve sizes at 2.11" Intake, and 1.66" While the 2.11" valves are standard issue, the valve seat can be machined to accept a larger valve with minimal work. Combustion chambers are exact in volume - so every cylinder has the same compression ratio. Each port is the same cross section - so every cylinder can reach higher true RPM potential. CNC machining produces ports and chambers to within tolerances of no more than .002"; in turn every cylinder can reach the same power potential and accurate tuning. - per manufacture website $1599 shipping included in the US, paypal, check, money order, whatever as long as fees are not taken out or you pay the fees. Pick up in Rochester MN and deduct $100
__________________
Brad Hansen 65 Cat Ventura, 66 Cat Vert, 63 GP |
#2
|
||||
|
||||
Speedmaster heads
PM sent
|
#3
|
||||
|
||||
Brad...sent you a PM.
__________________
Just a blind squirrel looking for a nut. |
#4
|
||||
|
||||
Heads are sold and delivered, thanks!
__________________
Brad Hansen 65 Cat Ventura, 66 Cat Vert, 63 GP |
|
|