FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
65’ GTO gets a new set of CV-1’s 👍🏻
One of our CV-1 customers in Tennessee (Mike Moak) just got his new CV-1 top end installed on his 505 combo, the car previously had CNC’d HighPorts (380cfm) heads with a ported NorthWind manifold, Mike’s car is a 65’ GTO full steel car (except bumpers and hood) that he drives and is a simple pumpgas combination, the car would typically run in the 6.74-6.76 range in the 1/8th mile, so he was anxious to see what the car would run considering his new CV-1’s are as cast and the manifold also is unported … it ran a 6.45 right off the trailer 1st time out, needless to say he was very happy considering no tuning has been done yet, the only thing he changed was the heads and manifold, and yea pistons too because of the different valve angles but still flat tops, great job Mr. Mike 👍🏻
|
The Following User Says Thank You to twinturrbo406 For This Useful Post: | ||
#2
|
||||
|
||||
Here’s the time slip …
|
The Following User Says Thank You to twinturrbo406 For This Useful Post: | ||
#3
|
||||
|
||||
Quote:
It has been awhile. How are you doing? I would like to add this to the pump gas list. http://www.magneticlynx.com/carfor/pont_gas.htm Can you give me some more information about the car and engine? Do you know how much the car with driver weighs? Thanks, Stan
__________________
Stan Weiss/World Wide Enterprises Offering Performance Software Since 1987 http://www.magneticlynx.com/carfor/carfor.htm David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software http://www.magneticlynx.com/DV Download FREE 14 Trial IOP / Flow Software http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php Pontiac Pump Gas List http://www.magneticlynx.com/carfor/pont_gas.htm Using PMD Block and Heads List http://www.magneticlynx.com/carfor/pont_pmd.htm |
The Following User Says Thank You to Stan Weiss For This Useful Post: | ||
#4
|
||||
|
||||
Nice!
|
The Following User Says Thank You to PAUL K For This Useful Post: | ||
#5
|
||||
|
||||
REALLY cool car and always great to hear real world results. Pump gas engine with Pontiac blue is fantastic. Hopefully the owner updates as he tunes, heck of a first effort.
__________________
Chris D 69 GTO Liberty Blue/dark blue T400, 9" w 3.50s, 3905lbs 461, 850 Holley, T2, KRE 310s, Comp HR288 w 165s, RA manifolds, 11.60@114, 1.58/60 The spare: 467, 850 Holley, T2, Edelbrock Dport 310cfm w RA manifolds, HFT 245/251D .561/.594L, 11.59@ 114, 1.57/ 60' |
The Following User Says Thank You to OCMDGTO For This Useful Post: | ||
#6
|
||||
|
||||
Quote:
“”” 65 GTO 3550 lbs ; 4:10 12 bolt ; old 28-10.5 bias slicks ; solid roller cam .727 intake .676 exhaust ; duration @.050 I-285 E-298 ; around 11-1 compression 93 octane pump gas ; 8" converter PTC ; reverse manual 400 tranny ; 505 MR1 ; 4.35 bore ; 4.25 crank ; 6.8 Crower Sportsman rods ;””” |
#7
|
||||
|
||||
Quote:
Thanks. I have added Mike to the list. Stan
__________________
Stan Weiss/World Wide Enterprises Offering Performance Software Since 1987 http://www.magneticlynx.com/carfor/carfor.htm David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software http://www.magneticlynx.com/DV Download FREE 14 Trial IOP / Flow Software http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php Pontiac Pump Gas List http://www.magneticlynx.com/carfor/pont_gas.htm Using PMD Block and Heads List http://www.magneticlynx.com/carfor/pont_pmd.htm |
#8
|
||||
|
||||
Thats bad ass for sure, Good job .
GT |
The Following User Says Thank You to blueghoast For This Useful Post: | ||
#9
|
||||
|
||||
Quote:
Stan, does your spread sheet contain the date these results were achieved? It kind of lends context to your list. Cooper for example i think achieved his results over 10 years ago, Mine i think was all of 11-12 years ago. etc. Its always great to see someone achieve their goals.
__________________
1969 carousel red firebird 455, richmond 5 speed 1964 540 gto 1971 lemans sport convertible 1972 Maverick under slow construction |
#10
|
||||
|
||||
Quote:
|
#11
|
||||
|
||||
Quote:
thanks, Stan
__________________
Stan Weiss/World Wide Enterprises Offering Performance Software Since 1987 http://www.magneticlynx.com/carfor/carfor.htm David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software http://www.magneticlynx.com/DV Download FREE 14 Trial IOP / Flow Software http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php Pontiac Pump Gas List http://www.magneticlynx.com/carfor/pont_gas.htm Using PMD Block and Heads List http://www.magneticlynx.com/carfor/pont_pmd.htm |
#12
|
||||
|
||||
Brian,
I have 2 different entries for you. For the '73 Ventura I have 2008. For your 9.05 I don't have a date or very much information at all. For your Dad's '65 GTO I have 1995 thanks, Stan
__________________
Stan Weiss/World Wide Enterprises Offering Performance Software Since 1987 http://www.magneticlynx.com/carfor/carfor.htm David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software http://www.magneticlynx.com/DV Download FREE 14 Trial IOP / Flow Software http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php Pontiac Pump Gas List http://www.magneticlynx.com/carfor/pont_gas.htm Using PMD Block and Heads List http://www.magneticlynx.com/carfor/pont_pmd.htm |
#13
|
||||
|
||||
Quote:
nice job Mike!
__________________
1969 carousel red firebird 455, richmond 5 speed 1964 540 gto 1971 lemans sport convertible 1972 Maverick under slow construction |
#14
|
||||
|
||||
Congrats Mike !
__________________
|
#15
|
||||
|
||||
Mike loves Norwalk so I’m sure he’ll be at the next one 👍🏻 … he does a good job of keeping track of things …
|
The Following 5 Users Say Thank You to twinturrbo406 For This Useful Post: | ||
Reply |
|
|