[kpbrown31]

Looking for front spindles for my 66 Catalina wagon. I think spindles from 65 or 66 will fit? Thanks

[Scarebird]

Correct. 67-68 are the same except lower steering arm holes are 1/2" instead of 7/16".

[kpbrown31]

Originally Posted by Scarebird

Correct. 67-68 are the same except lower steering arm holes are 1/2" instead of 7/16".

So a guy could use 67/68 spindles with a little modification? I can’t think of the correct name, but basically you’d drill out the hole to a 1/2” on the steering bar that spindle bolts to?

[kpbrown31]

And correct me if I'm wrong, but I haven't found anywhere that makes an aftermarket reproduction of them?

[Scarebird]

those are almost in zero demand - no repops.

[newmexguy]

There's a '67 Delta 88 four door sedan in an East El Paso yard. Drum Car. I have no idea if there is any interchange here. The olds used a "speedo" cable deal, used on the left front backing plate, that may be proprietary to Olds.

[Scarebird]

Completely different animal. Not till 1971 did the spindles interchange for full size.

[70ra455]

I should have s set from either a 66 or 67. How can I tell?

[Scarebird]

Post a pic.

[70ra455]

Here they are.

Please contact thru text or phone. Much easier and more timely from my end.

908.208.7778

I'm in metro Detroit/Ann Arbor

Phil

[Scarebird]

Those are 69-72 "A" disc - won't work with full size.

[70ra455]

Thanks for the info! Now I know what they are. Greatly appreciated.