| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
|
||||
|
||||
|
Hey all, looking for the above and seems it not available.
If I used an aftermarket or non-400 solenoid I'm guessing it works but checking if anyone has successfully done this. Here's one listed for a 350 Pontiac, for example: https://www.napaonline.com/en/p/CRB2...&ppid=CRB22187 My car is 78/W72/AC/4-speed Thanks |
|
#2
|
|||
|
|||
|
It only has to match the carb being using, to mount the bracket and have the plunger align so it can push idle up to adjusted setting.
|
| The Following User Says Thank You to Trevor78 For This Useful Post: | ||
|
#3
|
||||
|
||||
|
I used one that was listed for a corvette I think. I just made some spacers to position it accordingly with plans to make a different bracket at some point.
__________________
1977 Trans Am 400/4speed (swap) Brian |
| The Following User Says Thank You to bhill86 For This Useful Post: | ||
|
#4
|
||||
|
||||
|
Cool. I see some without the bracket: https://www.napaonline.com/en/p/CRB2...ng_dcoe_google
I should be able to remove the original from the bracket and make the new solenoid work. Thanks! |
|
#5
|
|||
|
|||
|
I have 2 without the brackets. I have decals for them as well. I had mine produced
|
| The Following User Says Thank You to burd For This Useful Post: | ||
|
#6
|
||||
|
||||
|
My 78 had a separate bracket and solenoid.
The separate solenoid fits the Holley carb bracket too!
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune [email protected] 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs 1964 Corvette Coupe 327 4 speed |
| The Following User Says Thank You to Skip Fix For This Useful Post: | ||
| Reply |
|
|