FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
TorqStorm Pontiac Supercharger Bracket set
I have a TorqStorm Supercharger bracket for Pontiac with 8 rib Crank pulley purchased here in PY. I bought a brand new idler pulley to go with it.
You get all hardware to the bracket bolt to your block. I値l ship on your Dime from Central Missouri 65202 $500 Firm You would need a 76mm or 84mm TorqStorm Supercharger, belt, piping and blow off valve and carb hat if you are going that route. I do have a line on a used 76mm TorqStorm that has factory warranty with 3.10 pulley very cheap if you want to piece this together. I bought this to run twins on mine but I致e decided I知 keeping a single Supercharger setup. It痴 the bracket on the right but it would mount on the left or passenger head. I also have a carb hat brand new low profile from my kit that I値l sell for $125. Sent from my iPhone using Tapatalk |
#2
|
||||
|
||||
A/C
Does torqstorm allow for an A/C compressor?
|
#3
|
||||
|
||||
Yes they have a bracket to mount it on the passenger side. This bracket that I知 selling mounts just the TorqStorm on the passenger side head.
Sent from my iPhone using Tapatalk |
#4
|
||||
|
||||
I now have a Brand New 76mm Head Unit that I would also sell for $2000 and if you buy bracket with Head Unit I値l give my low profile carb hat. Basically you would need your own charge piping, blow off valve and a belt to have a running setup with a lifetime warranty. I have registered the head unit with TorqStorm and it even has the $150 3.10 pulley already installed.
Sent from my iPhone using Tapatalk |
#5
|
||||
|
||||
Is this setup still available?
|
Reply |
|
|