FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
ISO harmonic balancer for 1963 389
ISO harmonic balancer for 1963 389 w/AC (not sure what years are compatible for '63). Mine has broken, not sure condition of crank until I tear it down. dont need the pulleys, only balancer that mounts to the crank.
Need crank bolt as well
__________________
Phil '63 Grand Prix / 389 Tri-power |
#2
|
|||
|
|||
I think I have one,not sure about the bolt.Tom
|
#3
|
||||
|
||||
PM sent.
__________________
1964 Tempest Coupe LS3/4L70E/3.42 1964 Le Mans Convertible 421 HO/TH350/2.56 2002 WS6 Convertible LS1/4L60E/3.23 |
#4
|
|||
|
|||
That is the hub,I have it with the balancer bolted to it but no pulleys.Tom
|
#5
|
||||
|
||||
I only need the hub, all other parts (expect bolt) are okay. not sure of condition of crank until I tear it down
__________________
Phil '63 Grand Prix / 389 Tri-power |
#6
|
||||
|
||||
Update on my balancer failure. I purchased a replacement hub and crankshaft bolt. The bolt wont tighten to specs. So it looks like I have to pull the motor and get a replacement crankshaft. Anyone know if the crank bolt hole can be machined to accept a larger bolt? any other ideas. Will be pulling the motor out once I get the accessory drives out and trans disconnect. Wont be cruising for a while ;-(
__________________
Phil '63 Grand Prix / 389 Tri-power |
#7
|
|||
|
|||
Get a shorter bolt!Tom
|
#8
|
|||
|
|||
Sounds pretty un fun. I would think a thread insert would work.
Or there are some cranks on this side of the pond, I will ask around.
__________________
"At no time did we exceed 175 mph.” Dan Gurney's truthful response to his and Brock Yate's winning of the first ever Cannonball Baker Sea-to-Shining Sea... Still have my 1st Firebird 7th Firebird 57 Starchief |
Reply |
|
|