| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
![]() |
|
| Members Helping Members help Buying a non Pontiac item, transportation help, Handy-man advice, directions, vacation ideas, places to dine, ebay and generally anything you think might help other members. |
| Reply |
|
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
|
I need to rebuild this flowerbed, it is rectangular except for this corner. I believe these cuts will be 67.5*
I know I should’ve paid more attention in school. Lol. Thanks
__________________
LIFT HEAVY, LIFE IS TOO SHORT TO BE SMALL! |
|
#2
|
||||
|
||||
|
Hard to tell by looking?
If the lower right post is basically perpendicular to the left top post, (if they went straight to each without the angled piece), I'd say it is probably 22.5º (miter cut?)
__________________
John Wallace - johnta1 Pontiac Power RULES !!! www.wallaceracing.com Winner of Top Class at Pontiac Nationals, 2004 Cordova Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats KRE's MR-1 - 1st 5 second Pontiac block ever! W.E.C moment "Every man has a right to his own opinion, but no man has a right to be wrong in his facts." "People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates |
| The Following User Says Thank You to johnta1 For This Useful Post: | ||
|
#3
|
||||
|
||||
|
That was my first guess, then I started thinking too much.
I’ll do a test on some scrap to be sure. Thanks
__________________
LIFT HEAVY, LIFE IS TOO SHORT TO BE SMALL! |
|
#4
|
||||
|
||||
|
22.5 is correct for the 2 mitered angles, 22.5 + 22.5= 45 degrees.
|
|
#5
|
|||
|
|||
|
Both are correct. Depends where you put zero
|
|
#6
|
||||
|
||||
|
Thanks
__________________
LIFT HEAVY, LIFE IS TOO SHORT TO BE SMALL! |
| Reply |
|
|