Reply
 
Thread Tools Display Modes
  #1  
Old 08-13-2025, 07:03 PM
Lemans64's Avatar
Lemans64 Lemans64 is offline
Ultimate Warrior
 
Join Date: Nov 2006
Location: Vancouver Island BC Canada
Posts: 1,915
Default Seat tracks?

Anybody used different seat tracks for their 64? Appears mine are wornout and every time I get on throttle the seat looses it's position causing some slight terror, LOL.
1st time was like maybe I did not get it latched right, 2nd time was thinking ok something not right. Did 3 time last night so pulled the seat and looked, tracks appear to be worn out, notches for adjuster are rounded off and tracks appears to be spread causing adjuster to jump when launching or hard on gas. Ames does not list a set for 64 so what is everybody using? Maybe time to upgrade seats to something more comfortable.

__________________
64 Lemans hardtop
4spd, buckets
  #2  
Old 08-13-2025, 08:19 PM
Lemans64's Avatar
Lemans64 Lemans64 is offline
Ultimate Warrior
 
Join Date: Nov 2006
Location: Vancouver Island BC Canada
Posts: 1,915
Default

Anybody try the 66 tracks for a 64? Ames list 66 track but not 64, just wondering if anybody has tried this?

__________________
64 Lemans hardtop
4spd, buckets
  #3  
Old 08-13-2025, 09:20 PM
alex s's Avatar
alex s alex s is offline
Senior Member
 
Join Date: Dec 2008
Posts: 112
Default

64 and 65 only

  #4  
Old 08-13-2025, 10:27 PM
Lemans64's Avatar
Lemans64 Lemans64 is offline
Ultimate Warrior
 
Join Date: Nov 2006
Location: Vancouver Island BC Canada
Posts: 1,915
Default

What's the difference? any Idea's?

__________________
64 Lemans hardtop
4spd, buckets
  #5  
Old 08-13-2025, 10:45 PM
GtoFM's Avatar
GtoFM GtoFM is offline
Senior Chief
 
Join Date: Apr 2018
Location: NW Ohio
Posts: 288
Default

The Parts Place lists them. Might be worth a phone call.
https://www.thepartsplaceinc.com/par...l-bucket-seats

  #6  
Old 08-13-2025, 10:53 PM
alex s's Avatar
alex s alex s is offline
Senior Member
 
Join Date: Dec 2008
Posts: 112
Default

Length

  #7  
Old 08-14-2025, 01:21 AM
Lemans64's Avatar
Lemans64 Lemans64 is offline
Ultimate Warrior
 
Join Date: Nov 2006
Location: Vancouver Island BC Canada
Posts: 1,915
Default

Which part is too long? Seat part (piece that bolts to seat) or floor part or both?

__________________
64 Lemans hardtop
4spd, buckets
  #8  
Old 08-15-2025, 05:19 PM
Lemans64's Avatar
Lemans64 Lemans64 is offline
Ultimate Warrior
 
Join Date: Nov 2006
Location: Vancouver Island BC Canada
Posts: 1,915
Default

So appears that I have the short version of these tracks, Nobody repo's the correct one for GTO or Lemans. Nova site has some that will work but adjuster knob is different
than GTO version. Looks like these are 64-65 only. After Nova ones that are close require shims in rear to keep height the same.

__________________
64 Lemans hardtop
4spd, buckets
  #9  
Old 08-20-2025, 01:55 PM
Lemans64's Avatar
Lemans64 Lemans64 is offline
Ultimate Warrior
 
Join Date: Nov 2006
Location: Vancouver Island BC Canada
Posts: 1,915
Default

OK does anybody have a parts listing for the 64 seat tracks? Are the bucket seat outer track the same as outer bench seat?

__________________
64 Lemans hardtop
4spd, buckets
  #10  
Old 09-24-2025, 01:34 AM
Koppster's Avatar
Koppster Koppster is offline
Senior Chief
 
Join Date: Dec 2008
Location: Garden Ridge TX
Posts: 338
Default

Quote:
Originally Posted by Lemans64 View Post
Anybody used different seat tracks for their 64? Appears mine are wornout and every time I get on throttle the seat looses it's position causing some slight terror, LOL.
1st time was like maybe I did not get it latched right, 2nd time was thinking ok something not right. Did 3 time last night so pulled the seat and looked, tracks appear to be worn out, notches for adjuster are rounded off and tracks appears to be spread causing adjuster to jump when launching or hard on gas. Ames does not list a set for 64 so what is everybody using? Maybe time to upgrade seats to something more comfortable.
Saw these on ebay this morning, thought you might be interested.

https://www.ebay.com/itm/18759138494...Bk9SR-qhkKOvZg

I went through this a few years back. While I did find a good set it seems to me someone with an engineering mind could probably repair worn/broken sets.

Rick

__________________
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:18 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017