[Joe]

Happy New Year to all,
Can someone ID the airhorn's I have please,
The carb tag number is 7029156
Airhorn casting number is 7035744
Thanks ins advance,
Joe

[65 Lamnas]

Originally Posted by Joe

Happy New Year to all,
Can someone ID the airhorn's I have please,
The carb tag number is 7029156
Airhorn casting number is 7035744
Thanks ins advance,
Joe

‘69 Olds 350 ci, with AT.

[Joe]

Thank you. Would you happen to have the Rochester/Delco needle and seat part number? So I can order up a few.
Thanks again

[65 Lamnas]

Originally Posted by Joe

Thank you. Would you happen to have the Rochester/Delco needle and seat part number? So I can order up a few.
Thanks again

They’re no doubt discontinued. Delco P/N is 30-132.

I would check with Cliff Ruggles at www.cliffshigh performance.com

He vacuum tests every one he sells. You’ll have to email him or call as those pieces aren’t on his website.

[Joe]

Thanks again. Ordered a few off-E bay this AM. It looks like my original 66 Tri power center air horn is lost for good. Sent it to a rebuilder for re-coloring and it got lost in UPS somewhere.
So I am going to clone one of these tops for use. They look very similar. At least until I can locate another original.

[Joe]

yet another question, there is a small metal shield around the needle/seat on these airhorns. Like a 3-sided box. What is the purpose, and can it be left out so I can use a brass float
instead of the newer black float.

[Dick Boneske]

I can provide a needle /'seat for your carb.. PM me for contact info.

The metal cage is not needed. Toss it.