[Cardo]

It was originally done with a gun with a brush end hooked to a hose hooked to a 55 gallon drum and a pump. I started in the paint department at one of the big 3 in 1989 and used to apply seam sealer. To try to duplicate it now I would use one of the sealers in a caulk gun and drag a wetted paint brush through it immediately after caulking the seam. The brush on you have is really good too if you work fast. You could probably use a brush with a little bit of mineral spirits in it for that one. Rob is exactly right on the sloppy and 10 seconds. We weren't worried about how it looked. As long as it was sealed into the oven it went.