[dataway]

Just posting the incremental progress as I go.

Feel free to point out any MAJOR issues, since I know there are a ton of smaller ones. For sanity sake I leave out minor casting details, casting seams, some bolt holes etc.

I'm probably going to go nuts when it's time to line up all the pulleys, hopefully I did a decent job of building adjustable components so I can adjust size and placement.

I'm trying desperately to confine my efforts to things that will actually 3d print and show up on a 1/10 scale model. It's hard when it's all blown up on the screen not to add those little realism details that would be way too small to print

[dataway]

This is the current state of the test prints. The pics don't really do it justice. The larger engine is 1/10 scale, the smaller is 1/24.

Still lots of tweaks to the printing process to get it right. But, you can almost read the intake part number with a magnifying glass