About Us

Bill S · 08-15-2003, 06:32 PM

The latest issue of Pontiac Enthusiast has an article with a picture of a full quarter panel for a '68 Firebird hardtop. What's the word on 67-68 full quarters ? I really want full quarters for my '67 convertible bird.

MorkGTO · 08-18-2003, 10:33 AM

I'd like PY to carry the OEM rubber grommets that Mr Gasket carries for the shifter and tranny arm holes (67 and up manuals). Part # 2807186.

Jack Ferris · 08-19-2003, 08:26 PM

Im sure its been mentioned in the past pages but here it is. CORRECT rear quarters for the 70-73 Fbody. The cheesebag quarters that are available now suck ass and are impossible to get right. Theres enough of these cars still in service and the majority need rust repair.

cscottfergus · 08-20-2003, 12:03 AM

A reproduction protecto-plate service by PY for cars documented through PHS. Mine disappeared long ago.

---------------------------
"If you know the enemy and know yourself, you need not fear the result of a hundred battles.
If you know yourself but not the enemy, for every victory gained you will also suffer a defeat.
If you know neither the enemy nor yourself,you will
succumb in every battle."
Sun Tzu

cscottfergus · 08-20-2003, 12:10 AM

Would like to see you publish a book on Firebird restoration complete with pictures. I know HP books has one on Camaros. If you cant do that maybe you can convince someone to write one, or maybe one exists that I don't know about.

---------------------------
"If you know the enemy and know yourself, you need not fear the result of a hundred battles.
If you know yourself but not the enemy, for every victory gained you will also suffer a defeat.
If you know neither the enemy nor yourself,you will
succumb in every battle."
Sun Tzu

Tim642957 · 08-22-2003, 02:47 PM

These may be listed in here somewhere and if so pardon the repeat...

1966 Bonneville - battery tray and the correct positive battery cable (the type with 2 additional accessory wires).

Grand Prix - a world class athlete in a tuxedo

jaynjess · 08-26-2003, 11:27 AM

1970 GTO Fender!!!

80TA · 08-27-2003, 07:19 AM

I want to see new pontiac metal dashes. I also want to see someone make some billet aluminum door handles to replace the crappy gm ones.Talking the inside door pulls on the 79 on cars.And someone should make some 16o mph speedos or complete replacement gauge clusters for our cars.

80TAWS6,400,edelbrock carb,accel wires,dual exhaust,dynomax mufflers,3.42 strange gears.Waiting for istall:CE subframe connectors , B&M 2400 nitrous holeshot.
14.64 at 97.3mph 2.46 60ft uncorrected tazzo vpc.
1900 ft altitude.

99TAWS6 ..lots of mods.13.35 at
109 2.27 60ft uncorrected tazzo vpc.
1900 ft altitude.

Judas · 08-27-2003, 10:38 AM

Heh...Yeah I recall the "ever snapping" door handle on my 79 Camaro. I stopped replacing after I was on the 3rd one.

We ain't pulling no Punches; We aim where the Crunch is

black1979transam · 08-30-2003, 03:29 AM

I would like to see a reproduction machined dash plate for the 79-81, for the special edittions with the gold tint.

Black 1979 S/E, My money pit

sdubransky · 08-30-2003, 12:28 PM

Any chance for 68 chrome for the front valance?

LEGTO · 08-30-2003, 04:59 PM

Reference the post from Bob Kazian on Jan 23.
The 65 lucite.
I just bought one on ebay with pitted chrome.
The lucite was great for my driver. I used a feeler gauge to CAREFULLY separate the adhesive between the plastic and the chrome piece.

Ccass · 09-02-2003, 08:11 PM

<BLOCKQUOTE class="ip-ubbcode-quote">quote:<HR>Originally posted by Dan Mork:
I'd like PY to carry the OEM rubber grommets that Mr Gasket carries for the shifter and tranny arm holes (67 and up manuals). Part # 2807186.<HR></BLOCKQUOTE>

We have both the metal and plastic bushings for the shift levers. There is also a simple little rubber ring washer that we also carry. e-mail me if this is what you are looking for.

---------------------------
Fool around, Get hurt, don't come crying to me.

Ccass · 09-02-2003, 08:16 PM

<BLOCKQUOTE class="ip-ubbcode-quote">quote:<HR>Originally posted by cscottfergus:
Would like to see you publish a book on Firebird restoration complete with pictures. <HR></BLOCKQUOTE>

No need to convince anyone of the usefullness and saleability of such a book. However, a restoration book is a tremendous undertaking and requires several years of dedication for a quality book. Who has that kind of time? I would start a new topic to continue dialogue on this subject.

---------------------------
Fool around, Get hurt, don't come crying to me.

Ccass · 09-02-2003, 08:16 PM

<BLOCKQUOTE class="ip-ubbcode-quote">quote:<HR>Originally posted by jaynjess:
1970 GTO Fender!!!<HR></BLOCKQUOTE>

Supposedly being worked on.

---------------------------
Fool around, Get hurt, don't come crying to me.

Ccass · 09-02-2003, 08:18 PM

<BLOCKQUOTE class="ip-ubbcode-quote">quote:<HR>Originally posted by black1979transam:
I would like to see a reproduction machined dash plate for the 79-81, for the special edittions with the gold tint.

<HR></BLOCKQUOTE>

Several companies are trying to get this project done.

---------------------------
Fool around, Get hurt, don't come crying to me.

fast1970transam · 09-03-2003, 10:02 AM

<BLOCKQUOTE class="ip-ubbcode-quote">quote:<HR>Originally posted by Beebe:
70-73 Firebird Tail Panel.......<HR></BLOCKQUOTE>

any of these ever gonna be made? it sucks how they make it for camaro's,but not for firebirds

She only want me for my pimp juice (that's all she want me for f'real).....ooooooh ooooh, Whoa-oh, oh ohhhh

72 LeMans · 09-04-2003, 11:07 AM

re-repo the 68/69 GTO fender.

1968 Pontiac GT0-400/M-21/3.90 Burmuda Blue with White Royal Bobcat stripes
1972 Pontiac LeMans-455/TH400/3.55's Cardinal Red. Hoping for high 11's
1977 Pontiac Grand Prix SJ. No engine/trans. Body straight. For Sale...Make Offer

Jim Mattes · 09-04-2003, 12:44 PM

67 fullsize quarter panels / at least patches!!

a-train · 09-05-2003, 08:30 AM

I would like to see repro specific black tail lights for the 79-81 TAs.

respone:

Menu

About Us