[Ccass]

Originally posted by RAJ7395:
Ah.. I see your point. It's no fair to get lit up in the dark. When I look at YO's and CI's catalog, they both have a reproduction center console and auto shifter plate with burlwood laminate (tape or whatever that stuff is). Therefore, someone out there is making the laminate for them. The question is who is their supplier? If we can find out where they are getting the laminate, you can buy it direct and use it to reproduce dash bezel kits. If there isn't a big enough return on investment justify the expence of making bezel kits, I'd like to be able to buy the raw material from you and cut it out myself. I've tried looking at local cabinet shops, hardware stores, etc.. and haven't found anything that's reasonably close as of yet.

<font size="2" face="Verdana, Helvetica, sans-serif">Try buying any of those burlwood items you see in the catalogs. When and if they ever do become available, I'm sure the material will be made available for the dash also.

[bigpop]

Chris,this was mentioned in the 64-65 GTO TECH section.How about the assembly manual for 65 ?? The 67 is available,why not 65??Thanks and ,of course,All the best ....bigpop

[Heybuck]

Chris,

Is Performance Years still restoring Wood Rim wheels?

I looked on the "On-line Ordering" for them and can't find any info.

Thanks [img]smile.gif[/img]

[ June 07, 2002, 09:46 AM: Message edited by: Heybuck ]

[Ccass]

Yes, There is a catagory under each catalog toward the bottom of the left side in blue that says "Services".

[Heybuck]

HELP,

I give up. Can't work it out.

Post up the link please.......

Thanks

[Glenp68]

Parking light lenses / assemblies for '68 FB

[67'7F6'Bird]

Looking for 67-68 Firebird Full rear quarter panels.

[Ccass]

Originally posted by Glenp68:
Parking light lenses / assemblies for '68 FB

<font size="2" face="Verdana, Helvetica, sans-serif">68 park housings GFF70H & 71H $59/ea.
68 park lenses GFF70P $99/pr.

[Bruce Meyer]

How about rear window chrome for 67 GTO?

[adam3291]

How about the outer plastic covers for the heater control units? My control unit is good, the plastic cover for the unit with the writing (heat, defrost, warm,cold) is scratched and beat up. Mine's is a 68, but you could make all sorts of years.

[A455GTO]

What he ^ said!

[455conv]

I'd like to see 70 GTO Fenders

[455conv]

I'd like to see 70-72 GTO rear bumper.

[455conv]

I'd like to see 70 GTO wheel well moldings.

[Lemans1]

How about some 65 GTO stuff.....like headlight and taillight bezels. Rear tail piece chrome would be nice too.

[Geeto 67]

I know this issue is being hashed to death...But 1967 GTO Full Quater Panels...When will they be reproduced? I have heard rumors of them being produced in the next couple of years (first from a GM Restoration parts sales guy, then a friend at the local ponitac dealer with a 1967 Lemans, and finally another friend and pontiac racer). Also What is to be expected in the near future for the 1967 Pontiac A-bodies.

Kerry

[aahhyes68]

Could someone please start working on a
"Time Machine". I would like the opportunity to buy a brand new '67 convertable GTO.
Thank's a bunch!
'65 Topless [img]smile.gif[/img] [img]smile.gif[/img]
I was only 2 at the time and I feel I was cheated!

[ June 23, 2002, 09:06 PM: Message edited by: '65 Topless ]

[rickbard]

I'd also like to find full quarter panels for 69-72 grand prix's, as well as inner and outer wheel houses.

I think PY could also look at producing 69-72 front signal lenses, with bezels and gaskets.

While we're at it, after four months looking for an ignition switch for my 69 GP, I think PY could make and sell a lot of those, too!

-- oops and update!

PY DOES sell an ignition switch for my 69 GP! I ordered one this morning, after a more thorough scutinization of their on-line catalog: no need to make more, I guess! -- RB

[ June 26, 2002, 01:08 PM: Message edited by: Poncho North ]

[superdave123]

Does anybody know if there is any repro pinch weld moulding for 67 GTO convertibles? That is #1 on my wish list!

[Ccass]

Originally posted by 455conv:
I'd like to see 70-72 GTO rear bumper.

<font size="2" face="Verdana, Helvetica, sans-serif">The bumper and the moldings are being worked on. No date though.