FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
LM-2 A/F logging question
Finally hooking up the rpm to my lm-2 af meter. I am using the analog cord with an msd box. I have it hooked up and the screen is showing my afr, and also has the RA lit up- which by the instructions says it means that rom logging is enabled and the unit is receiving a signal. But I was expecting to see my rpm on the screen with the afr. That is not the case. Does the lm2 only pair rpm with afr in the logs, but not on screen?
Or do I have something wrong? |
#2
|
|||
|
|||
I would have to look at my instructions. On the LM2 screen I have rpms. There are a few options for screen display..you may have to scroll thru them..
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2 373 gears 3200 Continental Convertor best et 10.679/127.5/1.533 60ft 308 gears best et 10.76/125.64/1.5471 |
#3
|
||||
|
||||
I know on my LM1 I had to add a variable resistor and turn it to get it to read the same as the tach.
__________________
Skip Fix 1978 Trans Am original owner 10.99 @ 124 pump gas 455 E heads, NO Bird ever! 1981 Black SE Trans Am stockish 6X 400ci, turbo 301 on a stand 1965 GTO 4 barrel 3 speed project 2004 GTO Pulse Red stock motor computer tune 13.43@103.4 1964 Impala SS 409/470ci 600 HP stroker project 1979 Camaro IAII Edelbrock head 500" 695 HP 10.33@132 3595lbs |
#4
|
||||
|
||||
Ok thanks Guys. I’ll try and play with it a bit and report back.
|
#5
|
|||
|
|||
Midnight,
I believe you just have to change the mode .Press the mode button till the heading analog RPM is displayed in the upper right corner. The RPMs will show below it . Glenn |
#6
|
||||
|
||||
Tandyman - you are right. I had in the wrong visual mode. I see the AF and RPM now. so great news. Bad news my tranny just decided to not cooperate with me. sigh.
|
Reply |
|
|