93-02 General Tech/Discussion 1993-2002 Firebird/Trans Am General Tech/Discussion |
|
06-07-2013, 07:59 PM
|
Chief Ponti-yacker
|
|
Join Date: Feb 2013
Posts: 577
|
|
2000 door mess
OK folks I finally had my 2000 Ram Air Conv drivers side power window replaced {168 in labor, 65 for new motor, about 250 total. I tried to presuade the repair guy to try and fix the little cracks forming in the door panels. He quoted a couple hours labor, with no idea on how they would come out. Anybody have good results with this repair? Anybody have a crack free drivers side Ebony panel for sale? At Norwalk, the judges said they dont deduct for these cracks, but Im sure they "notice them". Thanks again.
|
06-08-2013, 09:29 PM
|
Ultimate Warrior
|
|
Join Date: Jan 2004
Location: central Fla
Posts: 8,490
|
|
I have a spare but think is pass side.
you need to remove the staples and enlarge the holes,then reinstall every other one
or the cracks will get worse.
Also check and make sure the guy used the correct large head rivets on the window motor reinstall.
All those $$$$ makes me glad I do my own....
__________________
Everything comes and goes
Pleasure moves on too early
And trouble leaves too slow
|
06-09-2013, 09:13 PM
|
Chief Ponti-yacker
|
|
Join Date: Feb 2013
Posts: 577
|
|
My passanger side has a slight crack also. If your door is ebony, and if it may be for sale let me know. @216 410-1904 , leave a message and ill call you back. Thanks again
|
06-09-2013, 09:25 PM
|
Ultimate Warrior
|
|
Join Date: Aug 2005
Posts: 6,351
|
|
Quote:
Originally Posted by Cammer-6
I have a spare but think is pass side.
you need to remove the staples and enlarge the holes,then reinstall every other one
or the cracks will get worse.
Also check and make sure the guy used the correct large head rivets on the window motor reinstall.
All those $$$$ makes me glad I do my own....
|
This is what Im hearing all over the place. Might be doing my car next weekend. No cracks yet.
|
06-10-2013, 05:26 PM
|
|
Administrator
|
|
Join Date: Jun 2011
Posts: 660
|
|
155K and driver side has no cracks
Must have gotten lucky
__________________
"LIKE" Max Performance on Facebook!
"LIKE" Cold Case Radiators on Facebook!
"LIKE" GTOG8TA.COM on Facebook!
|
06-10-2013, 05:56 PM
|
Ultimate Warrior
|
|
Join Date: Aug 2005
Posts: 6,351
|
|
Quote:
Originally Posted by eric_cspan
155K and driver side has no cracks
Must have gotten lucky
|
Maybe 98-2002 models?
|
06-10-2013, 10:18 PM
|
Chief Ponti-yacker
|
|
Join Date: Feb 2013
Posts: 577
|
|
I believe that the cracks are mostly in 2000-02 cars. Not even 98 or 99 seem to get them.
|
06-11-2013, 01:44 AM
|
Ultimate Warrior
|
|
Join Date: Aug 2005
Posts: 6,351
|
|
Quote:
Originally Posted by red1975pacer
I believe that the cracks are mostly in 2000-02 cars. Not even 98 or 99 seem to get them.
|
Im not taking any chances on an $800 door panel. Im doing the staple thing anyway. I have a friend that has a crack in his 99 T/A.
|
06-11-2013, 01:03 PM
|
|
Chief Ponti-yacker
|
|
Join Date: Apr 2007
Location: Austin, TX
Posts: 648
|
|
Quote:
Originally Posted by red1975pacer
I believe that the cracks are mostly in 2000-02 cars. Not even 98 or 99 seem to get them.
|
Im thinking it was a problem with the mold
my 97 panels are fine
__________________
www.fquick.com/Captainofiron
68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
|
06-13-2013, 04:32 PM
|
|
Administrator
|
|
Join Date: Jun 2011
Posts: 660
|
|
Quote:
Originally Posted by Old Blue 66
Maybe 98-2002 models?
|
1994
__________________
"LIKE" Max Performance on Facebook!
"LIKE" Cold Case Radiators on Facebook!
"LIKE" GTOG8TA.COM on Facebook!
|
06-14-2013, 06:45 PM
|
Ultimate Warrior
|
|
Join Date: Jan 2004
Location: central Fla
Posts: 8,490
|
|
Quote:
Originally Posted by eric_cspan
1994
|
havent seen any from 97 and back
00-02 for sure tho
__________________
Everything comes and goes
Pleasure moves on too early
And trouble leaves too slow
|
06-14-2013, 06:54 PM
|
|
Moderator
|
|
Join Date: Dec 1999
Location: Port Charlotte, Florida
Posts: 8,688
|
|
My 99 is crack free, as was my 98 TA.
|
06-16-2013, 09:23 PM
|
Ultimate Warrior
|
|
Join Date: Jan 2004
Location: central Fla
Posts: 8,490
|
|
not to rain on the parade but Ive had 2 99s that had cracks
__________________
Everything comes and goes
Pleasure moves on too early
And trouble leaves too slow
|
06-17-2013, 08:24 AM
|
|
Chief Ponti-yacker
|
|
Join Date: Apr 2007
Location: Austin, TX
Posts: 648
|
|
I just bought some seats out of a 99 Trans Am, the guy was also selling the door panels, they looked like they were in ok shape, no cracks though
http://elpaso.en.craigslist.org/pts/3777076426.html
__________________
www.fquick.com/Captainofiron
68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 09:33 PM.
|
|