FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Garage Sale Any NON-Pontiac related item you want to buy-sell-trade or giveaway! |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
For the crafters: Brothers SDX-125 ScanNCut machine
To see pictures, go to ebay and search for Brothers SDX-125.
We make carburetor kits. Wanted an easy way to cut one-off carburetor gaskets. These things were advertised with glowing attributes. So I called Brothers, explained what I was doing, described the gasket material, and see stated she saw no reason why the machine wouldn't cut gasket material, as it will cut poster board up to about 3/16 inch. So I ordered one - $400. plus freight. I spent two hours trying to get the machine to cut gasket material (Armstrong N-8090). It plain will not do it! The gasket material is too tough. The scanning function works beautifully, and I am guessing that if one cut material (quilters) or craft paper (crafters) the machine would be great; but I do not have a need to do that, and the machine is in my way. Reboxed with all the packing materials in the original box. Price $250. plus freight. Compare against the prices on Ebay. Again, 2 hours of use. Contact me through my website thecarburetorshop.com or via telephone 573-392-7378 (9-12, 1-4 Mon-Tues central time). Reiterating - it will NOT cut carburetor gaskets! EDIT to comply with location requirement: we are located in Eldon, Missouri. Jon.
__________________
"Good carburetion is fuelish hot air". "The most expensive carburetor is the wrong one given to you by your neighbor". If you truly believe that "one size fits all" try walking a mile in your spouse's shoes! Owner of The Carburetor Shop, LLC (of Missouri). Current caretaker of the remains of Stromberg Caburetor, and custodian of the existing Carter and Kingston carburetor drawings. |
Reply |
|
|