[mybad66]

66-67 post Sedan side glass sets and the 1/4 window guides the windows ride in on the post itself.

[mgarblik]

Dash pads for 1962 Catalina. Never see a good one. Re-pops in black that could be dyed would be just fine. I think there would be little price resistance at $500.00-700.00. Only decent alternatives cost twice that much.

[gpmodelj70]

65-68 eight lug trim rings that are 100% indentical to originals....current reproductions are yellowish looking.

[coonhunter70]

69' LeMans front valance panels, good straight ones are are hard to find!

[goatwgn]

Factory style rubber floor mats in colors other than red, blue, and black. Such as gold, white, tan, aqua, green.

[north]

Mega dittos on those mats!!

If you want deposits for a production run I'd prepay for 2 sets of green and two sets of gold!

[70FormulaRAIII]

Sandalwood mats for a 70 firebird?

[Overkillphil]

I found that the 74 emblems are indeed unique. For some reason a new emblem was designed for the 74 Esprits with the optional 400 engine. I was able to find an NOS set but it took awhile. I now have both the 70 and 74 emblems if anyone is interested in reproducing them.

[Overkillphil]

There is a growing market in need of the 73-77 (ish) Firebird/Formula/T/A 4bbl air cleaner pans with the large/wide single snorkel. Remaining factory units have gotten prohibitively expensive and are increasingly difficult to find. Too many owners of yore foolishly threw these away in the 70's and 80's.

[RAJ7395]

3920924 Heater core tube to cowl seal for 69-76 firebirds and camaros with heater and no-A/C. VERY HARD PART to find in useable condition. Most cars need one as the original dry rots and falls apart when you service the heater core.

[Radman]

Pontiac style side mirrors with the wide angle mirror instead of the flat mirror. Early 60"s style.

[rexs73gto]

I would like to see 73 GTO, LeMans, Grand Am 1/4 panels & or patch panels . The 73's are different for all the other 74-77 1/4's & we need those for are cars to. The 74-77 1/4 patch panels are out & they are not perfect but are good enough to be able to use if you have a concern, but they won't can't work on our 73 1/4's. Please stamp some out , I know I would be in 4 2 for each side of the patch panels & i don't even need them I just want them in case.

[Brer Rabbit]

I restored a pair of 67 seats that were missing 2 of the tabs that screw in and hold the seat back tight at the top. After searching high and low on every source I could think of I gave up and strong armed the owner of a machine shop to reproduce a handful of the elusive pieces. I have enough for another set of buckets now incase anyone is in the same boat I was. Feel free to PM me.

[Two_70_Converts]

We would really like to see a 1968 GTO deck lid. The 1969 Deck lid looks really nice and I would like to see a similar one for 1968 since they are somewhat close in design.

[eric_cspan]

Originally Posted by Two_70_Converts

We would really like to see a 1968 GTO deck lid. The 1969 Deck lid looks really nice and I would like to see a similar one for 1968 since they are somewhat close in design.

It will be out this fall. Same supplier who did our 69 lids

[GT182]

Parts that are made correctly and are the same as the original parts. Many parts are not. Especially those made overseas. That is what's hurting our "hobby" and those selling us replacement parts.

The prices from a couple of catalogs are way out of line too. Not Ames, but I think you know the 2 who I mean.

[FunctionalShaker]

I hear ya, brother.

[ho428]

An OEM style replacement block.

[brut4s]

^^^X2!!

[64speed]

1964 GTO Wood Steering Wheel