FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
AFTERMARKET OIL PAN W/STOCK Pick-UP
Guys - i've already installed my oil pump with the pickup welded to the pump - I need a oil pan - What aftermarket pan can i get to hold my oil where it should be with the stock pump and pick up??? - .
I've searched the many, and I mean many threads -To see if I could come with a straight answer - No luck AM I stuck with the stock pan?? It's gonna be a street car with a little corner carving in my future. I've got a great suspension and I like to dig in and out of corners...but - I also like oil pressure. |
#2
|
||||
|
||||
Sounds like your best choice would be the trap door pan from pro-tour79,he's a member here,that pan is a stock depth sump with a baffle that has some added trap doors,and IIRC from the pics I've seen it should work with the OE pick-up assembly.
Part no. is EP-510 price is listed as $159.00 on their website,it is shown in the online web catalog,look for it in the engine parts section. Oh yeah,it says it uses the stock pick-up assembly on the website! http://www.pro-touringf-body.com/ HTH. |
#3
|
|||
|
|||
Bret P.,
I think it's right up my alley - I knew there had to be someone out there that made a pan for the weekend twister. I knew it - Thanks for the info - Man am I glad you read this post. I didnt want to sacrifice - Thanks again -Seriously I cant thank you enough. Last edited by 68fbird455; 08-06-2008 at 12:00 AM. Reason: I'm an idiot |
#4
|
||||
|
||||
Glad I could help,also supports another fellow board member too,so it's all good in my book!!!
|
Reply |
|
|