#1  
Old 01-26-2023, 10:52 PM
pont3 pont3 is offline
Chief Ponti-yacker
 
Join Date: Nov 2003
Location: St. Charles, Missouri
Posts: 581
Default Cost for a paint job

Okay, I understand the costs of paint have skyrocketed and labor has become unattainable. But in a topic on a different thread it was mentioned that a paint job (without body work) would cost 15k! Is that true?

If that's the case I'm out. Also, are body work labor charges the same as mechanical labor?

  #2  
Old 01-26-2023, 11:14 PM
Stuart's Avatar
Stuart Stuart is offline
Moderator
 
Join Date: Apr 2003
Location: Minneapolis
Posts: 7,938
Default

It may cost that much, it may be much more, it may be much less. It depends on a multitude of factors so there's no one simple answer. Chances are most cars will require at least some body work before they're ready for paint. Hourly rates will vary a lot depending on the shop as well as your location, but these days a rate in the neighborhood of $100/hour or more isn't out of the question.

  #3  
Old 01-26-2023, 11:33 PM
tom s tom s is offline
Ultimate Warrior
 
Join Date: Jan 2000
Location: long beach ca usa
Posts: 18,764
Default

We have a 76 TA at a shop,15-20K without a color change,25K with a color change.Tom

  #4  
Old 01-27-2023, 12:20 AM
4dblnkldude's Avatar
4dblnkldude 4dblnkldude is offline
Ultimate Warrior
 
Join Date: Oct 2006
Location: levittown
Posts: 1,855
Default

Quote:
Originally Posted by tom s View Post
We have a 76 TA at a shop,15-20K without a color change,25K with a color change.Tom
I'm paying 18k no color change. Black!!

__________________
" Is wearing a helmet illegal" Mike Kerr 1-29-09
  #5  
Old 01-27-2023, 01:25 AM
wbnapier wbnapier is offline
Chief Ponti-yacker
 
Join Date: Sep 2017
Location: Encinitas, CA
Posts: 590
Default

I help someone who does body and paint at a home shop. Complete body and paint, on frame "pave over", $15-20K. Cash only.

This is just body and paint, no chrome, powder coating, etc... Includes disassembly and assembly, but client usually helps a bit too.

Sometimes the clients completely disassemble car and deliver it on a rolling cart.

Most clients have deep pockets and money isn't an issue.

Having helped him on numerous projects, the labor is incredible. Even at these prices, it sometimes doesn't seem worth it to me. And this is with no fixed overhead. Last summer we probably had 9 man hours into just fitting a deck lid on a '60 Impala.

__________________
1965 Pontiac GTO
455/469 w/ #48 Heads, '65 Tri-Power
9.25:1 CR
Stump Puller Cam
Muncie M22W 1st-2.56 2nd-1.75 3rd-1.37 4th-1.00
3.55 Rear Differential
Front: 225/60R15 Height: 25.6"
Rear: 275/60R15 Height: 28"
  #6  
Old 01-27-2023, 12:33 PM
mgarblik mgarblik is offline
Ultimate Warrior
 
Join Date: Mar 2005
Posts: 6,035
Default

In Dayton, OH, a "scuff, prep and paint", same color, no body work, OE quality paint job would run right at 10K at a commercial body shop. This would be tape and paint, not disassemble, paint and reassemble. This is why I won't even consider buying a car that needs extensive body and paint work anymore. There are extremely rare exceptions of course. Even at the current crazy auction and selling prices, a frame off, rotisserie restoration is a losing investment unless a very rare, numbers matching model. Especially full size cars, my favorites.

  #7  
Old 01-27-2023, 01:16 PM
kingbuzzo's Avatar
kingbuzzo kingbuzzo is offline
Chief Ponti-yacker
 
Join Date: Mar 2022
Posts: 628
Default

dang, I didn't realize prices have gone so high

makes me feel better about buying one already painted at least...

  #8  
Old 01-27-2023, 01:16 PM
webfoot's Avatar
webfoot webfoot is offline
Ultimate Warrior
 
Join Date: Mar 2007
Location: Hermiston, OR
Posts: 2,074
Default

I'll never be in the market for a shop job. Many good DIY results to share here. I paint in my garage.

__________________
-Jeremy

1968 GTO 4-spd convertible, console, factory gauges, hidden headlights, 3.90:1 posi, AM/FM radio.

1962 Catalina convertible, Starlight black w maroon interior & white top.
The Following User Says Thank You to webfoot For This Useful Post:
  #9  
Old 01-27-2023, 05:06 PM
bdk1976 bdk1976 is offline
Chief Ponti-yacker
 
Join Date: Apr 2003
Location: Olympia, WA
Posts: 713
Default

DIY

It's not rocket science but is a lot of work.

The Following 2 Users Say Thank You to bdk1976 For This Useful Post:
  #10  
Old 01-29-2023, 03:37 PM
tjs72lemans tjs72lemans is offline
Ultimate Warrior
 
Join Date: Oct 2017
Location: Winona, MN
Posts: 1,157
Default

I agree it's worth learning to paint at todays prices. I've done four, and I agree it's a lot of work.

The Following User Says Thank You to tjs72lemans For This Useful Post:
  #11  
Old 01-29-2023, 07:42 PM
skunkwerks's Avatar
skunkwerks skunkwerks is offline
Senior Chief
 
Join Date: Jun 2014
Location: Dallas,Tx
Posts: 300
Default

Quote:
Originally Posted by pont3 View Post
Okay, I understand the costs of paint have skyrocketed and labor has become unattainable. But in a topic on a different thread it was mentioned that a paint job (without body work) would cost 15k! Is that true?

If that's the case I'm out. Also, are body work labor charges the same as mechanical labor?
Learn to do the prep work yourself. You can buy a portable paint booth and spray it yourself or in your garage or rent a booth. Use lacquer paint. very forgiving and you can still get it at TCP global. Base clear is more difficult to do DIY. very messy on the clear part.

__________________
White/Blue 71 455 HO T/A Auto
Blue/Blue 71 455 HO T/A 4 Sp
White/Sandalwood 71 455 HO T/A 4 Sp
White/Black 70 RAIII T/A M21/373 (stripper)
Carousel Red/Black 69 GTO Judge 4 Sp
2002 Firehawk Red/Black 6Sp
  #12  
Old 02-23-2023, 03:35 PM
tooski tooski is offline
Chief Ponti-yacker
 
Join Date: Oct 2010
Location: Thunder Bay, Ontario
Posts: 593
Default

I went to the Hot Rod Shop near Queen Creek for mechanical work, which it turns out they do very little of. While I was there the fellow took a cursory look and gave me a very round about estimate of $35k USD plus or minus (more than likely plus).
At home in Canada I had a restorer look over my other car. With the extent of work he wanted to do I'd be looking at close to $60k CDN. At best the non desirable 2nd gen FB would be worth $20-25K.
40 years ago I dabbled in painting cars I was flipping. I found the work too tedious for my tastes. At $125/hr shop rates I am going the DIY route an try not to screw up badly.

__________________
Frank M.
75 Firebird
68 Firebird 400 RAIII
66 Chevy II 461 Pontiac in AZ
  #13  
Old 02-23-2023, 03:45 PM
Scarebird's Avatar
Scarebird Scarebird is offline
Ultimate Warrior
 
Join Date: Nov 2002
Location: ABQ, USA
Posts: 4,998
Default

2 years ago my 71 was blasted to metal, some minor bodywork - started at $8,400 estimate, wound up a bit more than 14. Excellent work but guy had the car alomost 9 months IIRC.

  #14  
Old 02-23-2023, 04:01 PM
65madgoat's Avatar
65madgoat 65madgoat is offline
Senior Chief
 
Join Date: Feb 2019
Location: USA
Posts: 366
Default

Cheapest scuff and respray in SoCal on an already perfect body and has good adhering paint to just scuff and shoot runs $6k minimum. But any half decent paint job with trim removed, body blocked etc is minimum $13K I have been seeing. Show quality and no rust to repair $20k to $30k. Grand National Roadster type show cars cost $50k to $100k to paint - not including body work.

Probably can double these prices if replacing sheet metal and full disassembly of car.

  #15  
Old 02-23-2023, 05:08 PM
kingbuzzo's Avatar
kingbuzzo kingbuzzo is offline
Chief Ponti-yacker
 
Join Date: Mar 2022
Posts: 628
Default

This is why my old bondo bird is in Kuwait right now and I got a better one...

Cheaper than fixing her

  #16  
Old 02-23-2023, 06:02 PM
John Milner's Avatar
John Milner John Milner is online now
Ultimate Warrior
 
Join Date: Nov 2004
Location: Oklahoma
Posts: 1,042
Default

The key to a cheap paint job is being able to do all of the work yourself and living with a paint job that won't be perfect. I don't have the money to hire someone to paint any of my cars. I do the work myself and have driver quality cars to show from it. I'm perfectly fine with that too.

If you have a garage and air compressor, you can do it. The only suggestion that I would have is to buy a high-quality paint gun and use a good quality paint. A good paint gun will make your life a whole lot easier when you go to paint. My personal favorite is an Iwata LPH 400.

The Following 3 Users Say Thank You to John Milner For This Useful Post:
  #17  
Old 02-23-2023, 06:49 PM
tom s tom s is offline
Ultimate Warrior
 
Join Date: Jan 2000
Location: long beach ca usa
Posts: 18,764
Default

I got lucky(kind of)on my last car.63 tempest convert,factory black,needed some body work.My friend with 3 body shops felt sorry for me a let a couple guys work on it on weekends,preped primered ready to go.cost like $2500.Found a local shop to shoot in single stage for $1500.Came out great,when I sold the car I ended up loosing $4000.Tom

  #18  
Old 02-23-2023, 09:48 PM
Goatracer1 Goatracer1 is offline
Ultimate Warrior
 
Join Date: Oct 2003
Location: NH
Posts: 3,768
Default

First of all what do you want? Driver quality or show. How much body work does it need? How much of the disassemble/reassembly are you willing to do? If you do the prep and the car is ready for paint one of the chain paint shops can do a very good driver quality paint job. I have had one and several friends have had good ones. Also small local shops are generally going to do a more reasonably priced job than a large production shop. Just remember that it is what's under the paint that makes the paint job.

  #19  
Old 02-23-2023, 10:11 PM
mrennie's Avatar
mrennie mrennie is offline
Ultimate Warrior
 
Join Date: Dec 2002
Location: Cochrane, ON (we have polar bears)
Posts: 1,434
Default

I'm cheap and don't trust anyone, so learning to do DIY paint work was my goal early on. I figured if I screw up, I can only blame myself.

I started out painting brackets and progressed to the trunk, then primer, then paint.

It IS a ton of work. Like 95% prep work leading to the painting...then another 40-80 hours of sanding and buffing to get the dust and orange peel out.

I think I spent at least 5K on paint and primers so easy to see a shop charging 1.5-2x that.

As others have said, it won't be perfect...there will be dust, hair, bugs, runs, fisheyes, and orange peel. But in my limited experience, if you put enough paint on the panels you can fix a lot of mistakes
Attached Thumbnails
Click image for larger version

Name:	20220503_183409.jpg
Views:	155
Size:	95.5 KB
ID:	607759   Click image for larger version

Name:	20230212_162215.jpg
Views:	138
Size:	75.8 KB
ID:	607760  

__________________
Michael


Oshawa built 1 option Judge basket case. 463, SD KRE 295's, CNC'd factory intake, Cliff's Qjet, Stump Puller HR cam, RARE RA manifolds, Pypes exhaust, T56 Magnum, McLeod RXT clutch, 3.42 12 bolt. 24 year project almost done...
The Following 2 Users Say Thank You to mrennie For This Useful Post:
  #20  
Old 02-24-2023, 12:05 AM
MUSLCAH MUSLCAH is offline
Ultimate Warrior
 
Join Date: Sep 2015
Location: N.H.
Posts: 1,920
Default

I have a couple guys that want to do their own restoration. They come by and pick my brain ...I give them a few pointers ..but not all the pointers.

One of them bought an inflatable spray booth...he did a lot of you tube watching. .. so he came by my shop after he sprayed his car....paid
a ton for color and clear... and asked me what happened to my spray job......

I told him... there is a expensive learning curve to spraying product

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:55 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017