FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#41
|
||||
|
||||
On another note, this fan (Flex-A-Lite #295) technically is a replacement fan for a Silverado. I have it in my T/A it seals to the core perfectly. There are no air leaks whatsoever. It's not going to a first gen F, but second gen F and I'm sure it would fit an A body. Besides fit the number one reason I picked this fan was it is the only aftermarket fan with a 4600CFM rating, nothing else comes close.
In my opinion there is no electric fan set up that will pull more air than a mechanical stock set up. BUT, all new cars performance or not have electric fans with no issues. You would be better off with a junkyard electric fan/shroud combo than just about any aftermarket setup. They are just better engineered. My son has an Xtreme blazer with 6.0L and A/C he is using a dual electric fan and shroud out of Dodge Intrepid and he has no cooling issues with or without A/C on.
__________________
1978 Black & Gold T/A [complete 70 Ram Air III (carb to pan) PQ and 12 bolt], fully loaded, deluxe, WS6, T-Top car - 1972 Formula 455HO Ram Air numbers matching Julep Green - 1971 T/A 455, 320 CFM Eheads, RP cam, Doug's headers, Fuel injection, TKX 5 Spd. 12 Bolt 3.73, 4 wheel disc. All A/C cars |
#42
|
||||
|
||||
Quote:
When it kicks on it is a hard hit to the electrical system. I have separated the two fans by having Fan 1 kick on first then Fan 2 right after. But, when I turn on the A/C its a triple hit actually quadruple, both fans, compressor and blower. I'm working on that issue now.
__________________
1978 Black & Gold T/A [complete 70 Ram Air III (carb to pan) PQ and 12 bolt], fully loaded, deluxe, WS6, T-Top car - 1972 Formula 455HO Ram Air numbers matching Julep Green - 1971 T/A 455, 320 CFM Eheads, RP cam, Doug's headers, Fuel injection, TKX 5 Spd. 12 Bolt 3.73, 4 wheel disc. All A/C cars |
#43
|
||||
|
||||
Quote:
__________________
1979 Trans Am W72 400/4-Speed WS6 - Starlight Black Hardtop
Last edited by nUcLeArEnVoY; 04-20-2022 at 09:58 AM. |
#44
|
||||
|
||||
Quote:
__________________
1978 Black & Gold T/A [complete 70 Ram Air III (carb to pan) PQ and 12 bolt], fully loaded, deluxe, WS6, T-Top car - 1972 Formula 455HO Ram Air numbers matching Julep Green - 1971 T/A 455, 320 CFM Eheads, RP cam, Doug's headers, Fuel injection, TKX 5 Spd. 12 Bolt 3.73, 4 wheel disc. All A/C cars |
#45
|
||||
|
||||
|
#46
|
|||
|
|||
Thinking outside the box here, but what about using something like a .5 farad capacitor like one made for high power amplifiers? Run your fan relay power source off the capacitor and that would absorb the current shock.
|
#47
|
||||
|
||||
Quote:
__________________
1978 Black & Gold T/A [complete 70 Ram Air III (carb to pan) PQ and 12 bolt], fully loaded, deluxe, WS6, T-Top car - 1972 Formula 455HO Ram Air numbers matching Julep Green - 1971 T/A 455, 320 CFM Eheads, RP cam, Doug's headers, Fuel injection, TKX 5 Spd. 12 Bolt 3.73, 4 wheel disc. All A/C cars |
#48
|
||||
|
||||
a simple fan controller will do you pretty good to help manage your turn on loads.
|
#49
|
||||
|
||||
Enjoyed the comedy in recent posts. Problem was def the fan/airflow. I removed 16" electric and mounted a 18" mechanical flex fan, still have the gutted t-stat. Waiting on Moroso full flow, but running (2500 rpm) 30 min at a time the gauge never rises off the needle-stop (100 degrees). After 30 minutes, shut down, gauge will rise to 175-180. Gonna drop in a 160 t-stat and let the fun begin. Gotta get better e-fans for my test stand though (thinking "black-hole" sucking specs ). Thanks for all of your input, all was thought provoking and useful.
__________________
1966 GTO convertible, 2nd owner, Dad was 1st, owned 30 years 1972 TA tribute clone current project LSX/T56 |
The Following User Says Thank You to noalibi For This Useful Post: | ||
#50
|
|||
|
|||
Temp always goes up after engine is turned off!Tom
|
The Following User Says Thank You to tom s For This Useful Post: | ||
#51
|
|||
|
|||
Quote:
__________________
1968 Firebird IAIIa 522 340 E-heads Northwind with XFlow TBI 4L80E 3.50:1 Rear |
#52
|
||||
|
||||
Quote:
Like previously mentioned, the max amp ALTs that I've found which can handle a V-belt is right about 140-150a. Over that, and the belt will slip. Even with a fresh belt, and properly tensioned, 150a is borderline. I say use a large cap and a PMW controller with gradual ramp-up. That does it. If you wanted to, you could run an electric water pump, which drag racers do, and run the fans & the pump with the engine off between rounds to cool it. .
__________________
. 1970 GTO Judge Tribute Pro-Tour Project 535 IA2 http://forums.maxperformanceinc.com/...d.php?t=760624 1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car https://forums.maxperformanceinc.com...ght=procharger Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be |
#53
|
||||
|
||||
NO new cars have FLAT , sealed fan shrouds with electric fans. Also new engines have EVEN heat throughout for a more perfect efficient burn and emissions.
The ONLY set up that works best is a factory Clutch fan and shroud. This uses the LEAST HP, and cools the best. ( this has been proven on Hot Rod TV ( the pay side now). That said, sealing the radiator to the core support and around it is huge too. Obviously the 421 Mod is the cheapest way to go, but who wants to do that with a summit catalog at hand?? Fight, Fight, Fight!!
__________________
"The Future Belongs to those who are STILL Willing to get their Hands Dirty" .. my Grandfather |
The Following User Says Thank You to Formulabruce For This Useful Post: | ||
#54
|
|||
|
|||
Quote:
2x, I get 30-degree difference too using the inferred from Harbor Freight. |
#55
|
||||
|
||||
I'm curious, I don't recall what the '421 mod' is?
.
__________________
. 1970 GTO Judge Tribute Pro-Tour Project 535 IA2 http://forums.maxperformanceinc.com/...d.php?t=760624 1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car https://forums.maxperformanceinc.com...ght=procharger Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be |
#56
|
|||
|
|||
Quote:
My Brother-in-law raced @ Hiali in South Florida, short Track and they used to seal the sh*% out of the Shroud to keep under Hood Temps. out, plus they directed the air to the Radiator anyway they could with sheet Metal. |
#57
|
|||
|
|||
Quote:
I run both and a side kick. The pusher takes up only half the Radiator space and is switched manually. The side kick is to counter the 30 degrees increase from the AC, when it's turned on manually too! The Factory 19" Fan and Shroud, plus A HD Temp. actuated Clutch is key. I also invested in the 3-hole bypass 180-degree Thermostat, the 160 works but I prefer the 180 because I have the crossovers blocked for hot South Florida days. I also made a tight tolerance at the water pump plate, so the water jumps over the top of my Radiator viewed with the cap off. As stated earlier there is a 30-degree difference between the upper and lower hoses and the lower hose has the spring, so it won't collapse under any circumstance. |
#58
|
|||
|
|||
Quote:
Mikes Reply: I find that it is changing to the Heavy-Duty temp. actuated Clutch Fan that made a very big difference for me, the normal one the 428 ci HO called for was inadequate at best. The Clutch will speed up the Fan when you are @ idle, so you don't have a hot issue even at a stop light, if you use the HD Clutch. I could literally see my Rally gauge Temp. go from 225 degrees to 180 degrees and maintain that temp. at all times, by installing the HD Temp. actuated Clutch Fan, 180 degree 3-hole Thermostat and the water pump Modification done simultaneously! |
#59
|
|||
|
|||
Quote:
I have all the Extra options on my car and then some I created. The only one left for me is the Cruise Control. I went to a HD Alt. also, over 100 amps. When I stand outside near the Hood scoop, I can hear the air being sucked into it. Put a piece of paper over the hole and it will stay stuck to the Scoop. I am running Tri-power Rochester Carbs. Back to that Beer scenario, I could suck that Beer with a straw through the cardboard cover over the Scoop in seconds? I believe the Tri-power's CFM is about 800 or so, I have read. |
#60
|
||||
|
||||
The 421 mod is drilling a steam hole in the deck surface that the head gasket has a provision hole for, but Pontiac never drilled the hole, except for a few select engines. The 421s were in that group, hence the reference to a 421 modification.
By drilling that hole it is said that it will improve the cooling by eliminating a steam pocket area by venting it to the cylinder heads. I've never done it either, but probably would, if I were to build a fresh engine from this point forward. It wouldn't cost anything to try it, and eliminating a steam pocket can't hurt anything.
__________________
Brad Yost 1973 T/A (SOLD) 2005 GTO 1984 Grand Prix 100% Pontiacs in my driveway!!! What's in your driveway? If you don't take some of the RACETRACK home with you, Ya got cheated |
The Following User Says Thank You to Sirrotica For This Useful Post: | ||
Closed Thread |
|
|