FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
69 Taillight Sockets
Anyone know where I can get a taillight socket for a 69? I was surprised they were not in the Ames catalog or Year One.
Previous owner removed the backup light sockets and stuck something else in there. Also did they have just the one wire for that socket? Thats all that's there now. Thanks in advance! |
#2
|
||||
|
||||
Hope this pic helps, it is an M&H harness from Ames. It is like a part time job keeping the 69 tail lights working, horrible design. I never had this much trouble with my 70 which was encased, much better design.
__________________
Chris D 69 GTO Liberty Blue/dark blue 467, 850 Holley, T2, Edelbrock Dport 310cfm w Ram Air manifolds, HFT 245/251D .561/.594L, T400, 9" w 3.50s 3905lbs 11.59@ 114, 1.57/ 60' |
#3
|
||||
|
||||
Yes 1 wire
The ground is the braided strap The straps oxidize and need a lite scuffing I should have a pair of originals at the other garage I may go there today but tomorrow afternoon is more likely |
#4
|
|||
|
|||
Umm, yeah, but do they look as good? No! 😉
|
The Following User Says Thank You to will slow gto For This Useful Post: | ||
#5
|
|||
|
|||
Thanks Guys! I just picked up a nice used trunk harness. Probably just switch harnesses. Thanks, Scott, for the tip on the braided ground. That was always an issue. I would wiggle it around and then they would work, I'm going to clean everything up as I change it out.
|
Reply |
Thread Tools | |
Display Modes | |
|
|