 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
09-13-2022, 05:09 PM
|
||||
|
||||
Crane H-272 Camshaft #283941 Pontiac
Just in case someone needs a cheap, used camshaft in nice condition, made a long time ago when the metal was still good.
I pulled this out of my old Black '72 Formula's 455HO when I rebuilt it back in 2012. It ran very strong but I was rebuilding the engine back to stock condition since it had some crazy 12 to 1 domed pistons in it from a rebuild back in the 1980's. The cam was soaked in BoeShield and then stored in a wax-lined, cam box and has been on my shelf ever since. http://forums.maxperformanceinc.com/...695444&page=30 Crane H-272-2 Part Number: 283941 Good low and mid-range torque, good idle, daily usage, towing, performance and fuel efficiency, 2600-3000 cruise RPM, 8.75 to 10.5 compression ratio advised. RPM range: 1800-5400 Intake @.050: 216 Exhaust @.050: 228 Lobe Sep: 112 Adv dur Intake: 272 Adv dur Exhaust: 284 Lift: Intake: .454 Lift Exhaust: .480 $25 plus shipping. Pickup welcome in NJ Steve at nk15268@hotmail.com |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
