FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
'68 GTO Front Endura Bumper to Core Support Filler
Did all '68 GTO's get this part?
Was it only a/c or HD radiator cars that got them? Thanks. |
#2
|
||||
|
||||
Every 68-69 GTO with the Endura bumper had them
__________________
Ed 1968 GTO (Thanks Mom) 2006 Silverado 2007 Cadillac SRX 2015 Chevy Express |
#3
|
||||
|
||||
Thanks, that's what I thought too. And the sheet metal type hex head screws with the built-in flat washers just simply screwed into the holes in the core support with no clip-nuts used, correct?
|
#4
|
||||
|
||||
Mine has been apart for twenty years so its hard to remember, but the assembly manual does not show any clip nuts.
#14 x 7/8" screw with an integrated 1" washer.
__________________
Ed 1968 GTO (Thanks Mom) 2006 Silverado 2007 Cadillac SRX 2015 Chevy Express |
#5
|
||||
|
||||
Perfect, thank you!
A good friend of mine recently purchased a 27K mile '68 survivor car with no evidence that it ever had this filler. The holes in the core support have not been cut by any screws. Must have been a factory oops. Last edited by 428ho4spd; 04-27-2022 at 06:10 PM. |
Reply |
|
|