FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#41
|
||||
|
||||
68' 1BC Head & Cam Assy'
Have been SOLD off engine/Item#1. Post #2.
Thanks! Still for sale is the 1969 250 short block. 0.40 bore but not decked with new pistons, bearings & seals. Sadly stored outside and took some moisture in cyl #5 but nothing major. Cleaned up and inspected. Cross hatch still visable. $225 Pick up or your arranged shipping.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. Last edited by Jeff Hamlin; 05-01-2013 at 04:50 PM. |
#42
|
||||
|
||||
1966 SPRINT BLOCK & CRANK
$100. (pickup or your arranged shipping) obo
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. Last edited by Jeff Hamlin; 05-01-2013 at 04:49 PM. |
#43
|
|||
|
|||
coming to Orlando anytime soon?If that shortblock had a cheap ride Id go for it
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
#44
|
||||
|
||||
Hi Jeff
Is your 66 Radiator still availible ? Alex |
#45
|
||||
|
||||
Yes I have 2 the one show and an oem that does not have the cooling inlets.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#46
|
|||
|
|||
got any cheap rides for that shortblock?
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
#47
|
||||
|
||||
ATTN: ALEX
Here are a few of the parts off you list, I'll get to the others later.
Thanks. PM sent as well. Jeff
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. Last edited by Jeff Hamlin; 11-12-2013 at 07:52 PM. |
#48
|
||||
|
||||
A bit more...
Alex,
No good on a spacer or an open breather cap, unless your running a Closed PCV? I do have a few of that type cap. Any good auto store should have an open cap avail. Ill dig out some #s that will work.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. Last edited by Jeff Hamlin; 11-12-2013 at 07:52 PM. |
#49
|
||||
|
||||
If Alex passes on these what do you want for the pancake air cleaner and choke/rod?
|
#50
|
|||
|
|||
FYI thats not a 66
it was one year only for the rod and the stove in design used a pin and cotter pin to retain the rod vs all others that had the rod slip in a eyelet 66 is easy to ID with just one hole in the backside vs 2 All the rods I have are buried at this moment but pics later to show 66s
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
#51
|
||||
|
||||
Yes aware it is not 66, but that's why I didn't state '66
IIRC; it was off a '67 but don't hold me to that. This unit will fit & function and is in excellent condition. I used my last NOS '66 on my Lemans and like most of the small oem bits they are hard to come by.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#52
|
||||
|
||||
HPP,
If he passes there yours if you wish. Thanks.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#53
|
||||
|
||||
More offerings,
Dip stick w/tube. $15 Choke w/rod. Not the oem correct but very close and will fit & function. I've used one on another ’66 project car. $50 SPRINT Exhaust “Y” pipe. Last decent one left. $95 Distributor. Re-man unit, $50 Pancake air breather; Lid, base and new filter. Decent complete assy’; $200 Correct Harrison radiator for a manual trans (CORE). Out of a '66 parts car w/MT. It has NO cooling line provisions and needs to be cored, $45. Also have a 2nd which was from my old ’66 AT.This is re-cored and ready to use, $250. The st300 trans used in the OHCs did not need/use cooling lines? So I think some were made this way so they could be used for other apps. (FYI; Factory unit in my ’66 w/MT has line provisions?) Cam & Crank sprockets. $40 for the pr. Cam seals. $5 Fuel Pumps. NOS Delco $50 and re-man units which is also a re-buildable unit, $35 Most of these parts are pictured on the preceding pages, if not LKM
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#54
|
||||
|
||||
Last set of NOS '69 plugs for both 1&4BC engines
$30. shipped
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#55
|
||||
|
||||
SCRATCH THAT, Asking $20 on the above plugs.
Thanks.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#56
|
||||
|
||||
Sale Pending on '69 AC Plugs.
Thanks.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#57
|
||||
|
||||
Plugs have been sold.
Thanks RON.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#58
|
|||
|
|||
Cleaning out the garage
Jeff Hamlin definitely knows the meaning of paying it forward!
Just to let everyone know what kind of amazing friends we have here on this Pontiac forum. I bought an OHC motor/3 speed trans off of the OHC forum, but was flooded out by hurricane Sandy in both my auto repair shop and my summer home. I didn't know what to do, since there was no realistic way I could go to Virginia to pick the motor up. There was just too much going on here trying to clean up and try to save my auto shop and summer home to leave for that long. Both places were badly hurt, with the shop flooded with 5' of water and the home near LBI having almost 2 1/2' of water in the living areas. Lost everything inside both places, but at least both places were still standing. Jeff was kind enough to offer to pick up the motor & trans from where it was, store it for a month or two, and then deliver it from Virginia to New Jersey when he came up to help his folks, who also had lost their Jersey home to hurricane Sandy. It's heartwarming to know there are people in this world who would go out of their way to help a virtual stranger, neither ask or accept anything in return, and still offer help in the future. There are an amazing number of people who have volunteered their time and resources to help the people in this area who have lost everything they own, and have to literally start all over again. It really brings a tear to even an old tough guy Marine like me. Thanks again Jeff A pleasure meeting you. I can't thank you enough for the delivery of the cammer. I'm guessing you'll have a little more room in your garage now. I hope that someday I can repay your generosity. Thank you Ron & Jan Bolanowski Jeff, I know I've offered this before, but if you come up to NJ this summer, you're invited to any weekend barbecue you wish.
__________________
67 Lemans OHC 6 Sprint Clone T-5 5 speed convertible |
#59
|
||||
|
||||
I've bought parts from Jeff and they are always as decribed or better he takes the time to package everything very well. Has even sent a part I needed for free can't say enough. So im not suprised to hear he would help others. Thanks again!
|
#60
|
||||
|
||||
First let me say Thanks. This is my Hobby NOT my Buisness.
Your support is how I enjoy my Pontiacs. I like to think those I deal with would do the same for me, And I feel most would. Ron our paths are sure to cross again. Best of luck to you both! Cheers.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
Reply |
|
|