| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
12-10-2022, 03:26 PM
|
|||
|
|||
Ram air lower pan and Holley carb
Does any known if you can use a metal reproduction ra3 lower ram air pan with a Holley carb with vacuum secondaries without modifying the pan?
If not what mods are needed? Thanks |
|
#2
12-10-2022, 05:37 PM
|
|||
|
|||
|
I have been using on my 69 bird,TA hood with no issue
|
|
#3
12-10-2022, 09:31 PM
|
||||
|
||||
|
Believe some have dimples for the Holley float adjuster screws and some do not.
__________________
Happiness is just a turbocharger away! 960 HP @ 11 psi, 9.70 at 146. Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug! selling turbos and turbo related parts since 2005! |
|
#4
12-12-2022, 09:13 PM
|
|||
|
|||
|
Thanks for the feedback.
|
|
#5
12-12-2022, 10:51 PM
|
||||
|
||||
|
Yes two versions exist for the Ram Air -4- pans for fitting a holley. But doublecheck for a Ram Air 3 pan as I do not know if the dimples were ever offered on them. Maybe Tom S can post pics of his set up that clears.....
|
|
#6
12-12-2022, 11:25 PM
|
|||
|
|||
|
Mine is a PartsPlace RAIV first gen lower pan.Will shoot a pic of carb side.Tom
|
|
#7
12-12-2022, 11:56 PM
|
||||
|
||||
|
Yes. But he had asked about Ram Air THREE....
|
|
#8
12-13-2022, 12:13 AM
|
|||
|
|||
|
I don’t have a 3 lower pan,from the parts place picture I can’t tell if it has the dimples to clear the Holley .Tom
|
|
#9
02-12-2023, 07:40 PM
|
|||
|
|||
|
The metal reproduction ra3 lower ram air pan will clear a Holley carb with vacuum secondaries without modifications.
Thanks for the insight. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
