FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Gas Ports
Any advantage to using Vertical Gas Ports VS Horizontal for better ring seal. NA Application. Low tension rings like the Gas ports along with a Good Vacuum pump system to seal up the pings in the bore.
|
#2
|
||||
|
||||
...seal up the rings in the bore. eh.
Probably a requirement for N2O Probably a mandatory requirement for RPM > ~ 6200-6500 Not an exspert |
#3
|
||||
|
||||
OOPS. Should check my spelling EH !!! Just wondered if either Vertical or Horizontal Gas ported pistons have any distinct advantage in better ring seal. Happy New Year !!!
|
#4
|
||||
|
||||
Vertical will tend to plug up easier as more carbon formation on the crown vs on the roof of the upper ring land.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#5
|
||||
|
||||
That's what I was thinking Tom. Happy New Year to you.
|
Reply |
|
|