FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
SD valve covers
1) Are these accurate reproductions of '63 SD valve covers?
2) Is the bolt spacing different than standard covers or can they be used on Edelbrock heads? Thanks, Rob...
__________________
" Darksiders Rule "
|
#2
|
|||
|
|||
they are exact,if you look at the flat pentroof you will see a bump.It is there because they were repoped off my NOS set I sent to Barry Martin to do.I have run them on KRE D ports and have a set on a set of #64 heads as we speak.Tom
|
#3
|
||||
|
||||
Thanks Tom,
I knew you'd be the one to have the answer I was looking for! I think they'll be going on my Safari motor. Was going to use the old Cal Customs I have but these will look better. Can you fit roller rockers under them or do I need to pace them up? Rob...
__________________
" Darksiders Rule "
|
#4
|
|||
|
|||
I have H&S 1.65s under them with the thick gaskets.Tom
|
#5
|
||||
|
||||
i would love to have a set of these for the '62.... how much are they? and, how do i get them?
__________________
1968 Firebird 10.817/122.33 3600lbs trw 455, iron d-port heads/SD intake/q-jet, 9" tires 1.440 60ft 1962 Catalina 4100lbs trw 455, iron d-ports,perf RPM, 800holley, 9'' tires,(12.157@108.91)1.578 60' Oct 2010!! |
#6
|
||||
|
||||
Close to $300. They are on Ebay from time to time.
|
#7
|
||||
|
||||
Their on E Bay, just search Pontiac Super Duty.
|
#8
|
||||
|
||||
I have a set on my 63 Kaufmann D-ports now. They look and work great.
__________________
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. 1966 GTO Hardtop - PS 14.84 @ 97mph |
#9
|
||||
|
||||
Quote:
Can you post a pic of your motor? I'd like to see how they look. No clearance issues with roller rockers? Here's the e-bay link: http://cgi.ebay.com/ebaymotors/ws/eB...=STRK:MEWAX:IT Rob...
__________________
" Darksiders Rule "
|
Reply |
|
|