[rexs73gto]

I would love to have new upper door panals for my 73 GTO in white , & in all the other colors to but for me white. The upper door panals for the 73 Lemans are the same to with just a different placement for the script for either the GTO , Lemans or grand Lemans. Please make some things for the 73-77 A-Bodies to, it seems like these cars are completly forgotten when it comes to the GTO or Lemans. If you make the parts we will buy them.

[ddella22]

1967 2+2 fender louvers

[ddella22]

Any big car fender and quarter patch panels would be great

[nachomax]

Any word on the rear mount antenna for the 68 Firebird? I have had mine on back order for a while now.

[richmas5]

Any thing just as long as they make it in the USA and not overseas like 99.9% of the repop parts

[Daveh1970]

How about front and rear bumpers for 1964 A body? Also the chrome trim along bucket seat sides (like small hockey sticks) are not reproduced.

[7dgoat]

I'd like them to make the 1970 GTO endura bumper!

[cleveweld]

The sway bar to frame and the sway bar to strut rod rubber bushings need to be reproduced. These are parts that nobody has reproduced but almost every 61-63 Tempest owner needs. Pictured is the sway bar to strut bushing.

[J.C.you]

if it has not been said, a 72 gto hood. Fender louvers for 70 gp. Headlamp surrounds for 69 gto.

[FunctionalShaker]

69 trans am front stabilizer bar, correct rubber bushings, and rubber sleeves.

[Greenbird76]

New lower door panels for my 76 Firebird. 79-81 tail panel. And yes, I too wish sheet metal products were repopped in the USA with quality sheet metal. The overseas stuff is junk IMO. That is why I cut most of my needed sheet metal parts off parts cars. The only part I had to buy reppoped was a Goodmark 74-78 firebird tail panel.

[66Post]

Originally Posted by chief2k

How about the stainless trim for a 66 post coupe LeMans/GTO?

Do you mean the aluminum trim around the door post? Good idea!

[66Post]

66-67 Factory style shoulder belts.

[gtobake]

65 GTO/Lemans rear tail panel (6 rib)

[Scarebird]

Under dash courtesy lamp housings 68-72 "A"

[joesweeting]

1969 GTO underdash vents housing for factory A/C

[77 Canamman]

You rarely ever see this small rubber gasket on the air horn vent on the later Q-Jets.

GM Part number 9799698..

[mrgto69]

Originally Posted by Scarebird

Under dash courtesy lamp housings 68-72 "A"

These brackets are already reproduced. They are p/n RPI729 for the pair. Cost $20. If you have a non AC car, just order 1/2 set.

Ask & you shall receive..!

[joesweeting]

I would like the see 17inch Rally II steel wheels like on the rear of this car

[Scarebird]

Originally Posted by mrgto69

These brackets are already reproduced. They are p/n RPI729 for the pair. Cost $20. If you have a non AC car, just order 1/2 set.

Ask & you shall receive..!

thanks - The socket section also?