93-02 General Tech/Discussion 1993-2002 Firebird/Trans Am General Tech/Discussion |
|
01-28-2015, 02:32 AM
|
|
Senior Member
|
|
Join Date: Mar 2008
Location: San Jose, CA
Posts: 217
|
|
Really striking out with Sylvania bulbs
As you know, we have sealed beam headlights. I found out we can replace those with S10 headlamps (lmc truck sells the lamp and connector for $34 each). These come with a set of Sylvania bulbs which work great. But I want the ultra-bright zXe bulbs.
Order the 9006 bulbs, as recommended. Turns out they don't fit. Order the 9005XS bulbs. They fit great, but one of the bulbs is dead out of the box. Now I have to return those and hope I get 2 good ones. I emailed Sylvania support, hopefully they will send them to me quickly.
__________________
461ci, Edelbrock 72cc heads, KB 15cc dished pistons, comp xe274, PRW 1.5 roller rockers, Performer RPM intake, Holley 80508 750cfm, RARE oversized manifolds, Pypes X-pipe Exhaust
|
01-28-2015, 04:35 PM
|
|
Administrator
|
|
Join Date: Jun 2011
Posts: 660
|
|
Aren't these newer cars supposed to be more reliable
__________________
"LIKE" Max Performance on Facebook!
"LIKE" Cold Case Radiators on Facebook!
"LIKE" GTOG8TA.COM on Facebook!
|
01-28-2015, 06:33 PM
|
|
Ultimate Warrior
|
|
Join Date: Jan 2005
Location: Catawba Ohio
Posts: 7,212
|
|
I've had absolutely no luck with Sylvania bulbs in my wife's 08 Vibe, sometimes they last 3 months and if I'm lucky I might get 9 months out of them and I always replace them in pairs, not just the one that went out.
I started buying Phillips and have had much better luck with them as far as longevity, only problem is almost every store carries Sylvania. You have to look a little harder to find them but it's worth it. K Mart carries them, but we lost our last K mart around here around the first of the year.
__________________
Brad Yost
1973 T/A (SOLD)
2005 GTO
1984 Grand Prix
100% Pontiacs in my driveway!!! What's in your driveway?
If you don't take some of the RACETRACK home with you, Ya got cheated
|
12-18-2017, 08:55 PM
|
|
Ultimate Warrior
|
|
Join Date: Apr 2004
Location: NC
Posts: 2,650
|
|
I want brighter headlights for my 2000 Formula. Does anyone know of a brighter light bulb than the OEM bulbs?
__________________
1969 Firebird, Tx3-455/468 machined by CVMS
E-heads by Dave Wilcox/Comp Cams 300B-6 flat solid
850DP on E-85 by Eric Niefert/T2 1" plastic spacer
T-400/PTC 4000/390's/30x9 Hoosier radial slicks,#3400
1.38 60' 6.32 @ 108 MPH at Northeast Dragway NC 5/23/15 (9th pass on new engine)
https://m.youtube.com/watch?v=ePCu2v...ature=youtu.be
1.37 60' 6.26 @ 109 half track, 9.86 @ 136 1/4 mile, #3350 11/26/16 at Richmond Dragway (125th pass on new engine)
|
12-19-2017, 02:11 AM
|
|
Senior Member
|
|
Join Date: Mar 2008
Location: San Jose, CA
Posts: 217
|
|
Go the route I did with the custom LMC headlight housings. After I finally got the right lights that worked for my car, they were super bright.
__________________
461ci, Edelbrock 72cc heads, KB 15cc dished pistons, comp xe274, PRW 1.5 roller rockers, Performer RPM intake, Holley 80508 750cfm, RARE oversized manifolds, Pypes X-pipe Exhaust
|
12-19-2017, 01:01 PM
|
|
Ultimate Warrior
|
|
Join Date: Apr 2004
Location: NC
Posts: 2,650
|
|
Quote:
Originally Posted by 1966goat
Go the route I did with the custom LMC headlight housings. After I finally got the right lights that worked for my car, they were super bright.
|
So what did you install? 9005XS bulbs or ultra brute zXe?
I'm looking at the LMC website and I don't see either one...
__________________
1969 Firebird, Tx3-455/468 machined by CVMS
E-heads by Dave Wilcox/Comp Cams 300B-6 flat solid
850DP on E-85 by Eric Niefert/T2 1" plastic spacer
T-400/PTC 4000/390's/30x9 Hoosier radial slicks,#3400
1.38 60' 6.32 @ 108 MPH at Northeast Dragway NC 5/23/15 (9th pass on new engine)
https://m.youtube.com/watch?v=ePCu2v...ature=youtu.be
1.37 60' 6.26 @ 109 half track, 9.86 @ 136 1/4 mile, #3350 11/26/16 at Richmond Dragway (125th pass on new engine)
|
12-19-2017, 01:56 PM
|
|
Ultimate Warrior
|
|
Join Date: Apr 2004
Location: NC
Posts: 2,650
|
|
OK, I think I figured it out. In your original post you referred to them as lamps or headlamps and that through me for a loop. What I want to order is a set the custom headlight housings and the plug connectors. The custom headlight housings use a bulb unlike the OEM sealed beams. The 9005XS bulbs will fit in the back of the custom headlight housings.
Did you have to upgrade the headlight wiring harness other than replacing the plug connectors.
__________________
1969 Firebird, Tx3-455/468 machined by CVMS
E-heads by Dave Wilcox/Comp Cams 300B-6 flat solid
850DP on E-85 by Eric Niefert/T2 1" plastic spacer
T-400/PTC 4000/390's/30x9 Hoosier radial slicks,#3400
1.38 60' 6.32 @ 108 MPH at Northeast Dragway NC 5/23/15 (9th pass on new engine)
https://m.youtube.com/watch?v=ePCu2v...ature=youtu.be
1.37 60' 6.26 @ 109 half track, 9.86 @ 136 1/4 mile, #3350 11/26/16 at Richmond Dragway (125th pass on new engine)
|
12-19-2017, 06:32 PM
|
|
Ultimate Warrior
|
|
Join Date: Apr 2004
Location: NC
Posts: 2,650
|
|
Quote:
Originally Posted by 1966goat
Go the route I did with the custom LMC headlight housings. After I finally got the right lights that worked for my car, they were super bright.
|
Did you use 165mm or 200mm?
__________________
1969 Firebird, Tx3-455/468 machined by CVMS
E-heads by Dave Wilcox/Comp Cams 300B-6 flat solid
850DP on E-85 by Eric Niefert/T2 1" plastic spacer
T-400/PTC 4000/390's/30x9 Hoosier radial slicks,#3400
1.38 60' 6.32 @ 108 MPH at Northeast Dragway NC 5/23/15 (9th pass on new engine)
https://m.youtube.com/watch?v=ePCu2v...ature=youtu.be
1.37 60' 6.26 @ 109 half track, 9.86 @ 136 1/4 mile, #3350 11/26/16 at Richmond Dragway (125th pass on new engine)
|
11-18-2018, 12:04 PM
|
|
Ultimate Warrior
|
|
Join Date: Apr 2004
Location: NC
Posts: 2,650
|
|
I ended up ordering something made for the car since this thread went dead. I installed 6000K Xenon HID lights from Amazon. They work good and my wife likes them in her daily driver WS6 T/A.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________
1969 Firebird, Tx3-455/468 machined by CVMS
E-heads by Dave Wilcox/Comp Cams 300B-6 flat solid
850DP on E-85 by Eric Niefert/T2 1" plastic spacer
T-400/PTC 4000/390's/30x9 Hoosier radial slicks,#3400
1.38 60' 6.32 @ 108 MPH at Northeast Dragway NC 5/23/15 (9th pass on new engine)
https://m.youtube.com/watch?v=ePCu2v...ature=youtu.be
1.37 60' 6.26 @ 109 half track, 9.86 @ 136 1/4 mile, #3350 11/26/16 at Richmond Dragway (125th pass on new engine)
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 10:09 PM.
|
|