| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-10-2021, 03:23 PM
|
||||
|
||||
Victor intake and KRE big ports
It was mentioned in another thread that KRE's big ports for the HP heads are too big for the Victor to seal up. The pic is a Victor that's been port matched to KRE's big ports and as you can see there is plenty of room. It would have to be a really tall port for it not to fit into a Victor.
|
|
#2
04-10-2021, 03:56 PM
|
||||
|
||||
|
Good info.... Any idea if the Victor will seal to the 370 cfm "venturi port" heads?
|
| The Following User Says Thank You to PAUL K For This Useful Post: | ||
|
#3
04-10-2021, 07:13 PM
|
||||
|
||||
|
Quote:
LOL. |
|
#4
04-11-2021, 11:04 PM
|
|||
|
|||
|
I have a Victor that was port matched to a set of KRE 400cfm hi Ports that is currently in my 95 bird and has gone 5.27 in the 1/8 and 8.25 in the 1/4.
Last edited by aaronman; 04-11-2021 at 11:07 PM. Reason: Added detail |
| The Following User Says Thank You to aaronman For This Useful Post: | ||
|
#5
04-12-2021, 08:44 AM
|
||||
|
||||
|
Quote:
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74  2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#6
04-12-2021, 09:55 AM
|
|||
|
|||
|
In this conversation what are we considering as tall ports ? Our HP heads that are 400+ cfm average 2.611" with a Victor intake in use.
KRE built a set of HP heads that were reported to be "400" cfm in 2005 and they stated the ports were 2.5" tall. .
__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 ) Old information here: http://www.hotrod.com/articles/0712p...tiac-trans-am/ Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine) 5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension https://www.youtube.com/watch?v=qDoJnIP3HgE |
|
#7
04-12-2021, 11:33 AM
|
||||
|
||||
|
2.634x1.392
__________________
1969 carousel red firebird 455, richmond 5 speed 1964 540 gto 1971 lemans sport convertible 1972 Maverick under slow construction |
|
#8
04-12-2021, 01:01 PM
|
||||
|
||||
|
The set I have are 2.6 x 1.46 with no issues sealing to the intake.
__________________
Dave Polichena |
| The Following User Says Thank You to Dave Polichena For This Useful Post: | ||
|
#9
04-12-2021, 05:37 PM
|
||||
|
||||
|
2.688 x 1.406
__________________
Jack Ferris RestoRacing LLC www.restoracing.com Sandy, UT --------------------------------------------------- |
| Reply |
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
