[rick c]

67-69 firebird clutch return spring extension for v8 cars. they make them for 6 cyl cars and tell you to modify for v8,s. I see goodmark makes one for the camaro small blocks and claim it fits firebirds,but someone said it needs modifying too.

[WWS]

die cast grill for '72 GTO

[WWS]

anodized aluminum door & quarter reveal moldings for '66 - '67 GTO

[G20]

Die cast '64 GTO manual consoles. They are really hard to find.

[Outback Jack]

Correct mounting hardware and bushings for the 73 Firebird core support and nose panel.

[Sanduners]

63 Tempest Power Steering Pressure Hose. If you have one please PM me.

[Formulabruce]

Originally Posted by Outback Jack

Correct mounting hardware and bushings for the 73 Firebird core support and nose panel.

The lower mounting set that is sold by Ames works well, and I believe is better than stock. The only piece I see as slightly different is the "donut cushion" , but it works well. What exactly are you speaking about?> clips or?

[rexs73gto]

I would like to have patch panels for the rear 1/4 panel on a 73 GTO/LeMans as they are different then the 74-77 1/4 panels. Or even a complete 1/4 panel.

[Outback Jack]

Originally Posted by Formulabruce

The lower mounting set that is sold by Ames works well, and I believe is better than stock. The only piece I see as slightly different is the "donut cushion" , but it works well. What exactly are you speaking about?> clips or?

Yes "donut cushions" and hardware including the special nuts. I only have one original lower rubber bushing and sleeve and one square metal nut with the tab on one side. Do you have to enlarge the hole in the core support for the new donut cushions that Ames supplies?

[Formulabruce]

Originally Posted by Outback Jack

Yes "donut cushions" and hardware including the special nuts. I only have one original lower rubber bushing and sleeve and one square metal nut with the tab on one side. Do you have to enlarge the hole in the core support for the new donut cushions that Ames supplies?

Just got a set for a 1970 Im working on, and these have the correct size shaft in them, unlike earlier repops that were the size of the '73 units.

[hakansan]

I think the correct core support kit for 1970-1972 is S391.
Håkan

[Ccass]

Originally Posted by WWS

anodized aluminum door & quarter reveal moldings for '66 - '67 GTO

These are available for hardtop. I suppose you have a Sedan(post) car? I think that's an item you may see at some point. .

[Ccass]

Originally Posted by spieker

I would like to see accurate repros of 64 thru 67 steering wheels for Lemans-GTOs. Both the stock and the optional pontiac custom ones. Can they be produced for under $1100? Hell yes!

We are doing the 67-68 Deluxe wheel as we speak. Price will be around $299/ea. If this is a successful project and sales are decent, we'll look at the 66, 65 and 64 Deluxe wheels (probably in that order)

[67TIGER]

Does Ames Performance plan to carry this part anytime soon? I can't find a listing for it anywhere. The old PY Part number was RPI 357.

[melwff]

the 1971 and 1972 GTO use a "U" shaped piece of metal to stabilize the hood release rod where it inserts into the retaining clip on the hood latch. This piece typically breaks one arm of the "U" and appears to be impossible to find.

[coonhunter70]

69 LeMans front turn signal lens and rear tail light lens.

[se428bandit]

Interior for 1971-72 Ventura and grills for 1971-71 Ventura.

[Overkillphil]

These are needed for the 74's. I see Ames has the 350 ones listed (FC201M) for the 70 Firebird. They appear to be identical or practically identical to the 74 350 emblems, despite the GM part numbers being different.

The 400 emblems are the same style and angle/stud location as the 350 emblems. They could cross for the 70's and the 74's in the Catalog. Whoever is making the 350 ones for Ames should be able to make a nice 400 too.

Additionally, I would think some owners of other year Firebirds may be interested in them as an add on.

[ponjohn]

1973-1974 Ventura Tail panel

[kvunck]

1971-72 gto hood in steel or patch panel for inner and outer 7 inches of front of hood
1971 gto radiator support
1971 gto fenders