 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
01-10-2023, 04:24 PM
|
||||
|
||||
Venolia .040 over 455 pistons
For sale is a set of gently used Venolia 455 flat top pistons. These are custom pistons from Venolia ordered with pin oilers and coated skirts. They have been measured and visually checked for any issues or concerns. They are .040 (4.191) bore, .990 pin. 6.625 rod, 4.21 stroke. They have standard 455 ring pack but are currently set up for use with a back cut .043 top ring. I will leave the ring set up with the pistons so the user has a choice to use a better ring pack or factory 455 + .040 rings. The wrist pins are included and are .990 x 3.00 and weigh 130 grams. The pistons with rings and locks weigh 630 grams. The engine these pistons were used in had RAIV heads with 2.11/1.77 valves and a fairly large roller cam.
$435 plus shipping |
|
#2
01-11-2023, 12:27 PM
|
|||
|
|||
|
Do you know the compression height? .990 pins will require 6.625 pontiac rods to be honed correct?
|
|
#3
01-11-2023, 01:26 PM
|
||||
|
||||
|
Quote:
Compression height is around 1.483 measuring with a caliper. |
|
#4
01-22-2023, 04:44 PM
|
||||
|
||||
|
Sold
|
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
