[frankyboy455]

I was wondering if anybody knows if there is a difference between an original TransAm front lower air dam and a repro. I have what I believe is an original one and was wondering.

Frank.

[69FIREBIRD76MM]

do you have a picture on the part?

[frankyboy455]

sure, here are two pics. If some close-ups are needed, just let me know. Frank.

[69FIREBIRD76MM]

I am pretty sure they dont make if aftermarket yet. looks similar to a regular firebird piece

[frankyboy455]

Yes it is being reproduced, here's a link:

http://www.classicindustries.com/fir...ts/eb9201.html

I think you're confusing this with the metal air dam for 400 and A/C cars. This is in additiion to the metal air dam. It bolts to the metal air dam. Only on Trans Am.

Frank.

[trmjr1]

The reproduction air dam is an exact copy of the original - dimensionally. The graining may be a little different but it is a very good piece.

I don't know about the one from Classic above. Year One used to have the best.

Tom

[Donovan]

I had a repro from year one I sold a couple of years ago. It was thin plastic. Shiny and smooth on the back, pebbled finish on front. Maybe 0.060" thick. Flexible plastic.

I was under the impression this was an improvement over the original which was a rubbery plastic? Not sure!

[frankyboy455]

I'll measure mine today but it's definitely thicker than .060". It's rubbery as well.

[Tim john]

If you are offering it for sale, I may have interest. Any damage ? any repairs ? etc...Thank You.

Tim john---

[comanchefirebird]

Hi Frank,
Based on your description, it would appear that yours is original. I will measure the thickness on my original as it is quite thick ie 0.1 inch. Will post later
Steve

[roundportponchos]

yes, graining for repro different. My friend makes the correct one. I can post his #, if you one wants.

[frankyboy455]

just measured mine, it's .100" thick.